Director of Manufacturing and Quality
Bolt Graphics · Sunnyvale, TX
- Level
- Level: Director+
- Team
- Team: Quality
- Base pay
- Base pay: $200k–$250k
- Travel
- Travel: 40%
- Degree
- Degree: Required
- Experience asked
- Experience asked: 10+ years
- Certification
- Certification: Black Belt preferred
- Industry
- Industry: Industrial
- Posted
- Posted: Recently
The role in 30 seconds
A director-level quality role at Bolt Graphics (industrial) in Sunnyvale, TX. Capacity & Efficiency Optimization: Drive line balancing, automation initiatives, and factory layout designs to optimize throughput, maximize capital expenditure efficiency, and reduce cycle times.
- They ask for
- 10+ years · degree required · Black Belt preferred
- Tools it names
- Lean, Six Sigma, Black Belt, OEE, Root cause, SPC
- Base pay
- $200k–$250k
- Day to day
- about 40% travel
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Quality Engineer roles in Texas: typical posted base $90k–$143k. This one lists $200k–$250k.
Median of the low and high ends of 55 live postings that list pay, out of 145 quality engineer openings in Texas, read from manufacturers' own careers sites.
Texas plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 144 other live quality postings in Texas.
- Base pay
- About 93% above similar roles
- Experience asked
- More than usual (10+ vs 5+)
Typical $90k–$143k, from 54 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Root cause 66%
- ✓ Lean 37%
- ✓ Six Sigma 35%
- ✓ FMEA 32%
- ✓ Supplier quality 30%
- ✓ SPC 28%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for OEE, Machining, Injection molding, Casting, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Quality team at Bolt Graphics
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Which standards drive the work here: ISO 13485, IATF 16949, AS9100?
- How much of the job is customer complaints versus prevention?
- The posting says about 40% travel. Between which sites?
- The posting mentions a Black Belt. Does the company sponsor certification?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
Full description from Bolt GraphicsAs posted on their careers site.ShowHide
About the role
Reporting directly to the VP of Manufacturing Operations, the Director of Manufacturing and Quality will hold complete accountability for the global manufacturing strategy, production execution, and end-to-end quality management of Bolt's hardware portfolio. This leadership role spans the entire product lifecycle-from early NPI (New Product Introduction) and design-for-manufacturability (DFM) reviews to high-volume mass production, factory consolidation, and field quality tracking.
The ideal candidate has a proven track record of unifying multi-site manufacturing footprints, establishing overseas extended factories (particularly in Asia), and scaling rigorous Quality Management Systems (QMS). You will lead a cross-functional team of manufacturing, test, and quality engineers to achieve world-class production yields and flawless execution.
Qualifications
- ✓10+ years of progressive leadership experience in hardware manufacturing operations, NPI, and quality engineering within high-tech electronics, compute hardware, or complex electromechanical industries.
Education
- ✓Bachelor's degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a related technical discipline. An MS in Engineering or an MBA is highly desirable.
Show full description ↓Show less ↑
Bolt Graphics is a semiconductor startup based in Sunnyvale, CA building the fastest and most efficient graphics processors. We pride ourselves on our first principles approach to solving problems. We are energized by our mission to reduce the barrier of entry for content creation and consumption. Our goal is to enable everyone to easily create, simulate and consume immersive experiences as vividly as they can imagine them.
Our Values
- •Be Fearless: Unmute yourself. Test boundaries and get proven right.
- •Remain Adaptable: Stay comfortable in a continuously changing world. If you're wrong, concede and move on.
- •Educate Your Ego: Selflessly collaborate towards our shared purpose.
Global Manufacturing Strategy & Execution
- •Production Footprint Optimization: Architect and execute the global manufacturing strategy, including the optimization of domestic facilities and the successful launch and stabilization of overseas extended factories.
- •NPI to Mass Production Scaling: Drive the seamless operational handoff of complex hardware products from design engineering into high-volume manufacturing. Establish robust New Product Introduction (NPI) playbooks.
- •Capacity & Efficiency Optimization: Drive line balancing, automation initiatives, and factory layout designs to optimize throughput, maximize capital expenditure efficiency, and reduce cycle times.
- •Vendor & CM Operations: Manage technical execution at tier-1 Contract Manufacturers (CMs) and ODMs. Partner with Supply Chain to hold vendors accountable to strict operational SLAs.
End-to-End Quality Engineering & Compliance
- •QMS Leadership: Own, scale, and continuous improve Bolt's global Quality Management System (QMS) across all manufacturing sites and external partners, ensuring compliance with relevant international standards.
- •Advanced Quality Planning: Embed Design for Manufacturability, Assembly, and Test (DFM/DFA/DFT) early in the product development cycle. Implement robust PFMEA (Process Failure Mode and Effects Analysis) and control plans at all factory levels.
- •Yield & Reliability Maximization: Drive rigorous statistical process control (SPC) on the factory floor. Analyze complex test data to root-cause and eliminate component-level, PCBA-level, and system-level failures.
- •Closed-Loop Corrective Action: Lead global failure analysis (FA) and Corrective and Preventive Action (CAPA) processes for manufacturing escapes and field returns, ensuring engineering feedback loops are closed instantly.
Team Leadership & Executive Advisory
- •Organizational Scaling: Build, mentor, and lead a high-performing international team of Manufacturing, Test, and Supplier Quality Engineers.
- •Executive Metrics Dashboard: Define, track, and regularly report on mission-critical operational metrics (First Pass Yield, Cost of Poor Quality, OEE, Scrap Rate, and Field Defect Rates) to the VP of Operations and the executive leadership team.
Proven Delivery Track Record
- •Direct experience establishing and scaling overseas manufacturing facilities/extended factories (particularly in Taiwan, China, or Southeast Asia) and managing Tier-1 EMS/CM partners.
Technical Depth
- •Deep understanding of both Electrical fabrication (SMT lines, PCBA testing, ICT/FCT fixtures, thermal management) and Mechanical processes (precision machining, die-casting, custom tooling, injection molding).
Quality Methodologies
- •Expert knowledge of advanced quality tools (Six Sigma Black Belt preferred, Lean Manufacturing, SPC, 8D problem solving, FMEA, Gauge R&R).
- •System Familiarity: Extensive experience utilizing PLM (e.g., Arena, Agile), ERP, and manufacturing execution systems (MES) to drive process discipline.
Travel
- •Ability to travel globally (up to 30-40%) to domestic facilities and international manufacturing sites to lead factory bring-ups, line audits, and critical business reviews.
- •Targeting cross-functional team scaling, standard setting, and unifying overseas extended factories.
Unifying Global Quality Culture
- •"When scaling an operational footprint that includes both domestic facilities and overseas extended factories in Asia, a disconnect in quality culture often emerges. How do you instill a unified, proactive quality mindset across geographically separated teams so that local operators and remote contract manufacturers take joint ownership of quality standards rather than treating them as a checkbox exercise?"
Developing & Mentoring Specialized Engineers
- •"Manufacturing, Test, and Supplier Quality Engineering require vastly different technical skillsets. How do you approach building out a career progression track and mentoring framework for these distin
