ShopFloorJobs
AC

Manufacturing Quality Manager

Allen Control Systems · Pflugerville, TX

Level
Level: Manager
Team
Team: Quality
Experience asked
Experience asked: 7+ years
Industry
Industry: Industrial
Posted
Posted: Recently
Apply on Allen ↗

The role in 30 seconds

A management quality role at Allen Control Systems (industrial) in Pflugerville, TX. ● Develop quality strategies that support rapid production growth, new product introduction, and manufacturing scalability.

They ask for
7+ years
Tools it names
Lean, Root cause, SPC, FMEA, Control plans, CAPA

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Quality Engineer roles in Texas: typical posted base $90k–$143k.

Median of the low and high ends of 55 live postings that list pay, out of 145 quality engineer openings in Texas, read from manufacturers' own careers sites.

Texas plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 144 other live quality postings in Texas.

Base pay
Not listed in this posting

Typical $90k–$143k, from 54 postings that list pay.

Experience asked
More than usual (7+ vs 5+)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ Root cause 66%
  • ✓ Lean 37%
  • Six Sigma 35%
  • ✓ FMEA 32%
  • ✓ Supplier quality 30%
  • ✓ SPC 28%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for Robotics, Tooling, which few similar roles mention. If you have it, lead with it.

It asks for 7+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Quality team at Allen Control Systems

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Which standards drive the work here: ISO 13485, IATF 16949, AS9100?
    • How much of the job is customer complaints versus prevention?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

Full description from Allen Control SystemsAs posted on their careers site.Show

About the Role

Allen Control Systems (ACS) is seeking a Manufacturing Quality Manager , to lead the in-process quality, final inspection, and product release functions as we scale our manufacturing operations. This role is responsible for ensuring that every system built at ACS is manufactured to specification, properly dispositioned when issues arise, and verified conforming before it ships to the warfighter.

The Manufacturing Quality Manager will lead the Manufacturing Quality team, including quality engineers and in-process and final inspectors, and will work closely with Manufacturing, Engineering, Supply Chain, and the Supplier Quality and Compliance teams to establish robust process controls, drive root cause and corrective action, and reduce risk throughout production.

This is a hands-on leadership role for someone who is comfortable operating in a fast-paced environment, building processes from the ground up, and working directly on the production floor to solve complex manufacturing and quality challenges. The Manufacturing Quality Manager reports to the QA Director.

What You’ll Do

Manufacturing Quality Leadership

● Own and continuously improve the in-process and final product quality program across the organization.

● Establish manufacturing quality standards, processes, metrics, and expectations aligned with company and customer requirements.

● Lead and develop the Manufacturing Quality team, including quality engineers and in-process and final inspectors.

● Develop quality strategies that support rapid production growth, new product introduction, and manufacturing scalability.

● Partner with Manufacturing and Engineering leadership to identify and mitigate production quality risks.

● Establish clear quality escalation processes and drive accountability for quality performance on the production floor.

In-Process Control & Inspection

● Define and maintain in-process inspection, test, and acceptance criteria based on product risk and process capability.

● Develop and maintain inspection plans, work instructions, and quality checkpoints that are built into the production flow.

● Establish and manage final inspection and final acceptance processes, including functional and acceptance test requirements.

● Own the final quality release of product before shipment, ensuring all records, inspections, and customer

requirements

are complete.

● Apply measurement system analysis, gauging, and inspection techniques appropriate to the product and production rate.

● Ensure calibrated, fit-for-purpose inspection equipment and tooling are available to support production.

Nonconformance, Root Cause & Corrective Action

● Lead the nonconforming product process, including identification, segregation, documentation, and timely disposition (e.g., Material Review Board).

● Drive structured root cause analysis and corrective action using methodologies such as 8D, 5 Why, Fishbone, and CAPA.

● Ensure corrective and preventive actions are implemented effectively, verified for effectiveness, and closed on time.

● Implement containment actions when quality issues threaten production or product already built or shipped.

● Analyze nonconformance, yield, and defect trends to proactively identify systemic risks and improvement opportunities.

● Drive reductions in defects, rework, scrap, and production disruptions.

● Coordinate with Supplier Quality when nonconformances are traced to purchased material or supplier processes.

Production & New Product Introduction

● Partner with Engineering, Manufacturing, Supply Chain, and Quality during new product introduction and production ramp.

● Ensure manufacturing processes, inspection methods, and quality controls are ready to meet increasing production volumes without compromising quality.

● Review drawings, specifications, and inspection

requirements

with Manufacturing and Engineering to confirm they are clear, measurable, and producible.

● Support First Article Inspection (FAI) and production qualification activities.

● Participate in design and manufacturability reviews to identify potential quality risks early in the product lifecycle.

● Develop process controls such as PFMEAs, control plans, and statistical process control where appropriate.

Quality Metrics & Continuous Improvement

● Develop and maintain quality metrics and reporting, such as first pass yield, defect rates, escape rates, cost of poor quality, and corrective action performance.

● Use data to prioritize improvement efforts and track the effectiveness of changes over time.

● Work with Manufacturing to apply lean and continuous improvement practices that improve qualit

Show full description ↓

Company Overview

ACS (Allen Control Systems) is a defense technology company building precision robotic systems for the United States and its allies. Founded by two former U.S. Navy electrical engineers with deep experience in robotics and software, ACS brings together AI, computer vision, precision motion, and advanced hardware to solve complex defense challenges across land, air, and maritime environments.

Our flagship product, Bullfrog, is an autonomous precision weapon system that transforms existing weapons into highly accurate counter-drone systems — giving warfighters a scalable, cost-effective response to one of the fastest-growing threats on the modern battlefield. Bullfrog is deployed with U.S. forces, and ACS works with organizations throughout the U.S. military and national security community.

Following a $200 million Series B at a $2.2 billion valuation, ACS is rapidly expanding manufacturing, accelerating Bullfrog deployments, and developing the next generation of autonomous battlefield systems. This is an opportunity to join a proven, fast-moving team and help scale technology with direct, real-world impact on national security.

ACS is headquartered in Austin, Texas, with additional operations in Alexandria, Virginia; Mountain View, California; and Huntsville, Alabama. For more information, visit allencontrolsystems.com .

More Quality roles nearby