Manufacturing Engineer 2
ACME INDUSTRIES · Elk Grove Village, IL
- Level
- Level: Engineer
- Team
- Team: Manufacturing
- Degree
- Degree: Required
- Experience asked
- Experience asked: 75+ years
- Industry
- Industry: Industrial
- Posted
- Posted: Recently
The role in 30 seconds
An engineer-level manufacturing role at ACME INDUSTRIES (industrial) in Elk Grove Village, IL. Phase 2 — Process Design: Routing, Tooling, Fixturing, and Setup Documentation.
- They ask for
- 75+ years · degree required
- Tools it names
- GD&T, AS9100, Robotics, CNC, Machining, Casting
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Manufacturing Engineer roles in Illinois: typical posted base $97k–$134k.
Median of the low and high ends of 49 live postings that list pay, out of 87 manufacturing engineer openings in Illinois, read from manufacturers' own careers sites.
Illinois plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 86 other live manufacturing postings in Illinois.
- Base pay
- Not listed in this posting
- Experience asked
- More than usual (75+ vs 5+)
Typical $96k–$128k, from 42 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- Root cause 41%
- Validation (IQ/OQ/PQ) 41%
- ✓ Tooling 37%
- Lean 36%
- ✓ New product launch 34%
- Automation 25%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for AS9100, Casting, Painting / coating, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Manufacturing team at ACME INDUSTRIES
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: ACME INDUSTRIES in Elk Grove Village
1 other open role at this site.
- CNC Programmer - Large Parts (Castings and Forgings) · Manufacturing · Technician
Full description from ACME INDUSTRIESAs posted on their careers site.ShowHide
Position Summary
The Manufacturing Engineer is the technical backbone of ACME's production operation. This is a hands-on, floor-present role that bridges the Engineering department and the machine shop — from the first customer RFQ through NPI, first article, production launch, and ongoing continuous improvement. The Manufacturing Engineer owns the manufacturing process: how parts are held, how material is removed, how sequences are built, and how each operation is documented so that quality and repeatability can be achieved on every run.
ACME does not have a mentor structure to ramp up junior engineers. This role requires someone who arrives independently capable — a machinist-turned-engineer or a degreed engineer who has cut chips — and who can immediately take ownership of active work while building new capability alongside the team.
The Manufacturing Process — What You Will Own
ACME's manufacturing process for complex castings and forgings moves through five interconnected phases. The Manufacturing Engineer has a role in every one.
Phase 1 — Advanced Planning: RFQ and New Product Introduction (NPI)
Before a part is ever cut, it has to be quoted, won, and introduced. The Advanced Planning function coordinates the front-end of this cycle. The Manufacturing Engineer is the engineering voice in that process:
- ◆Review customer drawings, models, and specifications at the RFQ stage; assess manufacturability and flag DFM concerns early
- ◆Estimate machining cycle times, tooling costs, setup hours, and material removal rates to support accurate cost builds
- ◆Provide operation sequences and routing concepts that give Sales and Quoting a realistic basis for pricing
- ◆Participate in NPI kickoff meetings; translate engineering intent into a manufacturable process plan before the first PO drops
- ◆Identify special-process
requirements
(heat treat, coating, outside processing) that affect schedule and cost
Phase 2 — Process Design: Routing, Tooling, Fixturing, and Setup Documentation
Once a job is awarded, the Manufacturing Engineer owns the detailed process design — the decisions that determine whether a part can be made profitably and repeatedly:
- ✓Develop operation sequences and route sheets defining machine selection, clamping strategy, datum structures, and inspection hold points
- ✓Select cutting tools, inserts, toolholders, and speeds/feeds for each operation; build and maintain the tool lists that operators and programmers rely on
- ✓Design or modify workholding fixtures; coordinate fabrication through the Tool Room; validate fixturing for rigidity, vibration damping, and datum repeatability on large, asymmetric castings
- ✓Write setup instructions and operation sheets with sufficient clarity that any qualified machinist can execute the setup without Engineering on the floor
- ✓Identify and resolve GD&T interpretation questions with Quality before programming begins, not after first article fails
- ✓Specify pr
Show full description ↓Show less ↑
Description
ACME Core Values
Every ACME team member is expected to demonstrate our four core values in their daily work:
- •Dedicated — Get the job done attitude · Hungry for achievement · Act with urgency
- •Persistent — Iterative mindset · AH-HA moments drive us · Long-term view
- •Creative — Safer · Faster · Better · Unique problems, unique solutions · Open-minded
- •Supportive — Every stakeholder matters · Trust through integrity · Say YES! Let's win together
About ACME Industries MFG, Inc.
ACME Industries MFG, Inc. is a 75+ year precision CNC contract manufacturer headquartered in Elk Grove Village, Illinois. Operating from two facilities on Pratt Boulevard and Chase Avenue, ACME specializes in the machining of large, complex castings and forgings for customers in aerospace, defense, power generation, rail, and industrial markets.
ACME's core competency is manufacturing solutions for complex parts in critical applications — components where dimensional accuracy, material integrity, and repeatable process control directly affect mission outcomes. Our customers depend on ACME for low-volume, high-mix production of mission-critical hardware that other shops cannot or will not attempt.
ACME Components — Large Castings and Forgings
The parts ACME machines are not commodity work. Typical jobs involve raw aluminum, titanium, steel, Inconel, or ductile iron castings and forgings weighing tens to hundreds of pounds — parts that require careful material entry strategies, massive fixturing, and precise probing sequences before a single cutting tool engages. Characteristics of ACME's product mix include:
- •Large bores, deep pockets, and complex multi-axis contours on parts that will not fit on a standard machining center
- •Tight geometric tolerances (true position, concentricity, flatness) in materials prone to movement and hard spots
- •Long cycle times — many jobs run 4 to 20+ hours per operation across turning, milling, boring, and finishing
- •First-article and production runs supporting active aerospace / defense programs where traceability, AS9100 documentation, and ITAR compliance are non-negotiable
- •Horizontal boring mill (HBM) and vertical turret lathe (VTL) work for the largest components at the Chase facility
ACME's equipment fleet includes Haas VMCs, Mazak turning centers, Mori Seiki machining centers, Okuma lathes, Doosan lathes, VTLs, HBMs, and FANUC-controlled multi-axis platforms. By April 2027, four additional machine tools and a dedicated CMM lab will expand ACME's production capacity as we execute a production plan scaling from 250 to over 1,500 units across key product lines over the next three years.
Why This Role Exists
Production is doubling. New machine tools are arriving. Key senior engineers are retiring, taking with them decades of institutional process knowledge. ACME is hiring Manufacturing Engineers — not just programmers, not just estimators, not CI specialists — engineers who cut chips, own processes, and build ACME's capability from the inside out.
