Quality Engineer II
Fresenius Medical Care · Waltham, MA
- Level
- Engineer
- Team
- Quality
- Base pay
- $150k–$158k
- Degree
- Required
- Experience asked
- 5+ years
- Industry
- Medical devices
- Posted
- 15 days ago
The role in 30 seconds
An engineer-level quality role at Fresenius Medical Care (medical devices) in Waltham, MA.
- They ask for
- 5+ years · degree required
- Tools it names
- Root cause, FMEA, MSA / Gage R&R, Minitab, ISO 13485, FDA / GMP
- Base pay
- $150k–$158k
Read from the posting. The full description is below.
From the plant jobs report · week of October 19, 2026
Quality Engineer roles in Massachusetts: typical posted base $107k–$149k. This one lists $150k–$158k.
Median of the low and high ends of 50 live postings that list pay, out of 70 quality engineer openings in Massachusetts, read from manufacturers' own careers sites.
Massachusetts plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 69 other live quality postings in Massachusetts.
- Base pay
- About 29% above similar roles
- Experience asked
- Typical (5+ years)
Typical $100k–$138k, from 38 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Root cause 69%
- ✓ FDA / GMP 60%
- ✓ Validation (IQ/OQ/PQ) 51%
- CAPA 50%
- ✓ ISO 13485 46%
- ✓ FMEA 37%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for Minitab, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Quality team at Fresenius Medical Care
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Which standards drive the work here: ISO 13485, IATF 16949, AS9100?
- How much of the job is customer complaints versus prevention?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
Full description from Fresenius Medical CareAs posted on their careers site.ShowHide
requirements
are being met in an effective manner to achieve quality by design, including those for design verification, validation, specification and procedure development, risk management, and design review.Applying advanced risk management practices (PFMEA) to evaluate process risks, ensure mitigation, and establish production controls to Maintain compliance with ISO14971;
- ✓Assisting in developing and establishing quality systems programs and plans that ensure compliance with the Quality System Regulations;
- ✓Developing, implementing, and/or maintaining instructions and methods for inspecting, testing and evaluating product conformance to required specifications;
- ✓Reviewing and validating service bulletins, field service notices, and other documentation;
- ✓Reviewing service data records and ensuring their traceability;
- ✓Developing process improvements in cooperation with Lawrence and MediMexico (MDM) service departments;
- ✓Assisting with internal audits for the evaluation of compliance with the Quality System Regulations;
- ✓Assisting with audits of external suppliers including conducting supplier assessment and on-site audits to verify supplier quality systems and overall capabilities;
- ✓Developing and prioritizing an auditing schedule to ensure that designated suppliers are audited on a regular basis to ensure good manufacturing practices (GMP) and quality standards are met;
- ✓Collaborating with supplier representatives on quality problems, ensure that effective corrective actions are implemented (SCAR), and contribute to supplier quality improvement programs.
Requirements
Position requires either (i) a Bachelor’s degree (or an equivalent foreign degree) in Biomedical Engineering or a closely related field and 5 years of experience as a Quality Engineer in the medical device field or (ii) a Master’s degree (or an equivalent foreign degree) in Biomedical Engineering or a closely related field and 3 years of experience as a Quality Engineer in the medical device field. Must also have 3 years of experience (which can have been gained concurrently with the primary experience requirement above) working with the following:
- ✓ISO14971, 21 CFR Part 820 and ISO 13485;
- ✓Investigating and processing medical device product complaints and preparation of Nonconforming Material Reports and performing Root Cause Analysis and CAPAs;
- ✓Minitab, Gage R&R and Change Control review;
- ✓Risk analysis, DFMEA, Design Verification, and test method validation as well as with procedural gap analysis; and
- ✓Medical Device Supplier quality and Medical Device quality auditing
Will accept any qualified combination of education, training and/or experience.
This is a telecommuting position working from home. May reside anywhere in the United States.
Salary is $150,000 - $157,500 per year for a 40-hour work week.
Show full description ↓Show less ↑
Quality Engineer II, NxStage Medical, Inc., a Fresenius Medical Care N.A. company, Waltham, Massachusetts (Remote)
Will be responsible for applying biomedical systems engineering and quality assurance principles and techniques to NxStage’s product development lifecycles, focusing on design assurance for product development projects and postmarket issues. Will also be responsible for testing NxStage medical devices and performing oversight of service activities in relation to postmarket issues. Also responsible for supplier quality, internal and external auditing to regulation and standard. Specific duties will include:
- •Assisting in supporting biomanufacturing teams in the investigation of manufacturing problems and product complaints, helping them to determine the root cause of the malfunctions and recommending the appropriate corrective and preventive actions to prevent their recurrence;
- •Investigating and processing medical device complaints and maintaining an appropriate and manageable level of open complaints;
- •Assisting in maintaining quality system information databases, evaluating quality data and preparing periodic reports to monitor business trends;
- •Providing Quality oversight and guidance to the design and development of new products, and to support the development of viable production processes for the products under development Supporting Engineering in the development, testing, verification, validation and commercialization of new products;
- •Processing Non-Conforming Material Reports (NCMRs) including Material Review Board (MRB) dispositioning; Assist with nonconformance (product or process) process including immediate actions, containment, root cause investigation; corrective action and disposition of nonconforming materials during Material Review Board (MRB) meetings;
- •Ensure that design control