Technician- Manufacturing Engineer II USA
First Solar · Ohio
- Level
- Level: Engineer
- Team
- Team: Manufacturing
- Degree
- Degree: Required
- Experience asked
- Experience asked: 1+ years
- Industry
- Industry: Industrial
- Posted
- Posted: 17 days ago
The role in 30 seconds
An engineer-level manufacturing role at First Solar (industrial) in Ohio. Develop a complete understanding of area processes, equipment, and support systems.
- They ask for
- 1+ years · degree required
- Tools it names
- SPC, Control plans, Robotics, Automation
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Manufacturing Engineer roles in Ohio: typical posted base $80k–$100k.
Median of the low and high ends of 15 live postings that list pay, out of 119 manufacturing engineer openings in Ohio, read from manufacturers' own careers sites.
Ohio plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 118 other live manufacturing postings in Ohio.
- Base pay
- Not listed in this posting
- Experience asked
- Less than usual (1+ vs 5+)
Typical $80k–$100k, from 14 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- Lean 45%
- ✓ Team leadership 41%
- Root cause 38%
- Tooling 37%
- ✓ Automation 31%
- Six Sigma 29%
✓ = this posting asks for it too. % = share of similar postings that mention it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Manufacturing team at First Solar
We found 3 people at this company and state: 2 in this kind of role, 1 leaders. Engineers who joined in the last year or two reply the most. See them ↓
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
Write to Kevin → (free) - 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
Full description from First SolarAs posted on their careers site.ShowHide
responsibilities
will focus on material handling and JBT AGV operations throughout the entire facility.
- ◆Guide production associate to upskilling MH Equipment and Process
- ◆Perform, as directed, all necessary maintenance and repair of the equipment in a timely and cost-efficient manner.
Education/Experience
- ✓High School Diploma or equivalent with 1 year experience as First Solar Manufacturing Engineering Technician I or 3 years First Solar Technical experience or 10 years technical experience in a Manufacturing setting, OR
- ✓Associate’s degree in a technical discipline with at least 1 year as First Solar Manufacturing Engineering Technician I or 2 years First Solar Technical Experience or at least 3 years technical experience in a Manufacturing setting, OR
- ✓Bachelor’s degree in technical discipline with 0–2-year technical experience in a Manufacturing setting.
Required Skills/Competencies
- ✓Safety first mindset.
- ✓Extensive verifiable electrical/electronic and mechanical knowledge.
- ✓Extensive verifiable hands-on troubleshooting/repair skills.
- ✓Competency in maintaining and repairing one or more of the following process equipment toolsets is strongly preferred: robotics, highly automated material handling (conveyor) systems, accumulation/storage systems and auto guide vehicles (AGV).
- ✓Data acquisition and presentation of data in report form.
- ✓Advanced computer skills with MS product + vendor software.
- ✓Self-directed, able to work with minimal supervision.
- ✓Good written and oral communications skills.
- ✓Ability to troubleshoot and solve equipment issues on the manufacturing line.
- ✓Ability to troubleshoot and solve process issues on the manufacturing line.
- ✓Ability to deal with administrative, as well as technical tasks.
- ✓Working knowledge of common Windows computer applications (Word, Excel, Outlook).
- ✓Ability to identify recurring issues and develop/communicate improvement recommendations.
- ✓Demonstrates a continuous improvement mindset by (identifying and/or contributing to improvements in specific processes, systems, or workflows).
- ✓Exhibits a learning mindset by (seeking opportunities to expand knowledge, develop skills, and stay current in relevant areas).
- ✓Leverages technology, including AI and automation tools, to (enhance efficiency, decision-making, analysis, or operational outcomes as applicable to the role).
- ✓Shows curiosity and adaptability by (responding to change, adopting new tools/processes, or supporting innovation initiatives).
Essential
Responsibilities
- ◆Adhere to all safety procedures and good housekeeping standards
- ◆Solve day-to-day production, equipment, and process problems
- ◆Identify and implement yield and product performance improvements.
- ◆Develop methods to assign causes to yield excursions
- ◆Ensure all processes are running on target as defined by the Process Control Plan
- ◆Respond to SPC process control alarms, bringing processes back into control
- ◆Execute planned process experiments, collect and analyze data and report experimental results
- ◆Collect data relating to daily tool performance and associated product performance
- ◆Provide training to production associates
- ◆Develop and update internal documentation including drawings, standard operating procedures, safety documentation and process specifications
- ◆Interface with internal associates and supplier representatives, as required, to complete assigned projects
- ◆Develop a complete understanding of area processes, equipment, and support systems
- ◆Maintain effective communication with production associates and manufacturing engineers
- ◆Disposition non-conforming product according to established criteria (NCP)
- ◆Ensure waste materials are discarded in their designated containers
- ◆Ensure hazardous waste containers stay closed except when adding or removing waste
- ◆Ensure satellite accumulation containers stay in their designated locations
- ◆Preforming FAT (Final/Factory Acceptance Test) on MH equipment
- ◆Inventory management with JBT AGV operations
- ◆Other duties as assigned – Generate daily shift report and Line Walk.
- ◆Job description subject to change at any time.
Requirements
Manufacturing Physical
Requirements
(Module Operations such as Production Operator, Production Technician, etc.):
· Will sit, stand, or walk short distances for up to 12 hours per day.
· Will climb stairs or steps on a frequent basis.
· Will lift up to 58 pounds on an occasional basis, according to work instruction.
· Will lift up to 37 pounds on a frequent basis.
· Will push or pull up to 50 pounds of force on an occasional basis.
· Will push or pull up to 37 pounds of force on a frequent basis.
· Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis.
· 20/40 vision in both eyes (with or without correction) and the ability to distinguish between red, yellow, and green is required.
· May reach above shoulder heights and below the waist on a frequent basis.
· May stoop, kneel, or bend, on an occasional basis.
· Must comply with all safety standards and procedures.
· Ability to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistan
Show full description ↓Show less ↑
First Solar reserves the right to offer you a role most applicable to your experience and skillset.
Basic Job Functions
- •Assist in the installation and qualification of systems, troubleshoot day-to-day manufacturing issues, identify and/or implement system improvements that contribute to the achievement of throughput, yield and product performance goals. Will include supporting the operation of pilot-line equipment to define a new process followed by a transition to start-up, qualification, and implementation of the new production process with the eventual evolution into a standard production MET position. Primary initial
Reporting Relationships
- •This position will not have direct reports.
Travel
0%-5%
