ShopFloorJobs
D

Process Engineer 1

DENSO · Maryville, TN

Level
Level: Engineer
Team
Team: Process
Base pay
Base pay: $73k–$91k
Travel
Travel: 10%
Degree
Degree: Required
Experience asked
Experience asked: 5+ years
Industry
Industry: Automotive
Posted
Posted: 4 days ago
Apply on DENSO ↗

The role in 30 seconds

An engineer-level process role at DENSO (automotive) in Maryville, TN. New product planning, Introduction, trials preparation and documentation.

They ask for
5+ years · degree required
Tools it names
Lean, Six Sigma, Root cause, FMEA, IATF 16949, Validation (IQ/OQ/PQ)
Base pay
$73k–$91k
Day to day
some off-shift / weekend coverage · about 10% travel · relocation help
Openings
5 with this title at this site

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Process Engineer roles in Tennessee: typical posted base $96k–$120k. This one lists $73k–$91k.

Median of the low and high ends of 6 live postings that list pay, out of 22 process engineer openings in Tennessee, read from manufacturers' own careers sites.

Tennessee plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 21 other live process postings in Tennessee.

Base pay
About 24% below similar roles

Typical $96k–$120k, from 5 postings that list pay.

Experience asked
Typical (5+ years)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ Lean 36%
  • ✓ Root cause 36%
  • ✓ Automation 36%
  • ✓ Validation (IQ/OQ/PQ) 32%
  • ✓ New product launch 27%
  • Team leadership 23%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for IATF 16949, Time studies, which few similar roles mention. If you have it, lead with it.

It asks for 5+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Off-shift / weekend coveragePromotion path mentionedRelocation help

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Process team at DENSO

    We found 4 people at this company and state: 2 in this kind of role, 2 leaders, plus 2 likely hiring managers. Engineers who joined in the last year or two reply the most. See them ↓

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

    Write to Eugen → (free)
  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • How does off-shift and weekend coverage work?
    • The posting says about 10% travel. Between which sites?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: DENSO in Maryville

8 other open roles at this site · 4 people we found in process roles at DENSO.

All 9 roles at DENSO →

Process Engineer 1 at DENSO in other locations

DENSO lists this title in 7 places. Pick the plant you can get to.

Full description from DENSOAs posted on their careers site.Show

Key Responsibilities

  • ◆New product planning, Introduction, trials preparation and documentation
  • ◆Production capacity studies, line layouts, cycle time studies, processing cost studies
  • ◆Process Design and development
  • ◆Prototype and Design validation testing
  • ◆New equipment specification development, installation and training
  • ◆New equipment budgetary planning, quotation, procurement, and project management
  • ◆Production lines support
  • ◆Manufacturing manual process automation (vision guided robotics and others)
  • ◆Process improvement and machine optimization as well as process optimization
  • ◆Product defects root cause analysis, investigation and countermeasure development
  • ◆Support process documentation (PFMEA, PCS, Process Flows, policies, etc.) for IATF certifications
  • ◆Other

Required Qualifications

  • ✓Bachelor's degree or higher in Engineering
  • ✓0-5+ years of related experience
  • ✓Ability to work effectively with a multi-disciplined cross-functional team in a fast-paced work environment
  • ✓Ability to successfully manage several tasks or projects at once
  • ✓Ability to travel domestically and internationally, up to 10%
  • ✓Willingness to work periodic overtime, as required
  • ✓Possess and demonstrate excellent analytical, communication, and interpersonal skills
  • ✓Ability to think 'outside the box' and develop clever, unique solutions to problems
  • ✓Willingness to interface and collaborate with other departments to help reach overall DENSO and Production Engineering or Project goals.
  • ✓Demonstrate initiative by investigating outside own areas for given tasks and by helping others
  • ✓Demonstrate ownership of responsible areas through committed actions and responses
  • ✓Ability to develop and closely follow schedules and due dates
  • ✓Willingness to contribute opinion and feedback in various meetings and situations
  • ✓Possess and Demonstrate a Positive attitude and outlook
  • ✓Demonstrated drive to achieve results
  • ✓Ability to adapt to ever changing work requirements, tasks, and environments
  • ✓Ability to maintain and promote a safe and clean working environment
Show full description ↓

The Process Engineer 1 will work within the Production Engineering FA department to design, implement, and optimize manufacturing processes for automotive electronic products. This role involves collaborating with cross‑functional teams to launch new equipment, resolve production issues, and drive continuous improvement initiatives that enhance quality, efficiency, and safety.

Annual Salary: $73,000 - $91,000

  • •Develop and validate manufacturing processes for new automotive electronic products.
  • •Plan and execute equipment launches, including installation, qualification, and hand‑over to operations.
  • •Troubleshoot process and equipment issues on the shop floor and implement corrective actions.
  • •Conduct time studies and capacity analyses to improve production efficiency.
  • •Create and maintain process documentation, work instructions, and standard operating procedures.
  • •Support root‑cause investigations and implement preventive measures.
  • •Collaborate with design engineering to ensure manufacturability of product designs.
  • •Lead continuous improvement projects using Lean, Six Sigma, or other methodologies.
  • •Monitor key process metrics and generate performance reports for management.
  • •Ensure compliance with safety, quality, and environmental standards.
  • •Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related field.
  • •0–2 years of experience in automotive electronics manufacturing or related industry.
  • •Knowledge of process development, equipment qualification, and troubleshooting techniques.
  • •Familiarity with Lean manufacturing, Six Sigma, or continuous improvement tools.
  • •Strong analytical and problem‑solving skills with ability to interpret data.
  • •Proficiency in Microsoft Office Suite; experience with CAD or statistical software is a plus.
  • •Effective communication and teamwork abilities.
  • •Ability to work in a fast‑paced, safety‑focused manufacturing environment.
  • •Willingness to obtain and maintain any required certifications or clearances.
  • •Attention to detail and commitment to quality standards.

More Process roles nearby