ShopFloorJobs
CI

Brock Grain Systems Engineering Technician

CTB, Inc. · Indiana

Level
Level: Engineer
Team
Team: Manufacturing
Degree
Degree: Required
Industry
Industry: Industrial
Posted
Posted: 30+ days ago
Apply on CTB, Inc. ↗

The role in 30 seconds

An engineer-level manufacturing role at CTB, Inc. (industrial) in Indiana. Up to 15% travel based on expected visits to prototype new designs in field, dealer training, customer site support or visit key suppliers of pr.

They ask for
degree required
Tools it names
Validation (IQ/OQ/PQ)
Day to day
some off-shift / weekend coverage

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Manufacturing Engineer roles in Indiana: typical posted base $96k–$135k.

Median of the low and high ends of 11 live postings that list pay, out of 70 manufacturing engineer openings in Indiana, read from manufacturers' own careers sites.

Indiana plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 69 other live manufacturing postings in Indiana.

Base pay
Not listed in this posting

Typical $96k–$135k, from 10 postings that list pay.

Experience asked
Not stated

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • Lean 53%
  • Tooling 40%
  • New product launch 34%
  • ✓ Validation (IQ/OQ/PQ) 34%
  • Team leadership 29%
  • Root cause 24%

✓ = this posting asks for it too. % = share of similar postings that mention it.

At a glance

Off-shift / weekend coverageLifts up to 75 lbs

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Manufacturing team at CTB, Inc.

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • How does off-shift and weekend coverage work?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

Full description from CTB, Inc.As posted on their careers site.Show

responsibilities

and activities, which may change or be assigned at any item with or without notice.

Position

Requirements

  • ✓Education: Requires a bachelor’s degree in electrical engineering technology (EE or EET).
  • ✓Experience: 2 + years of direct electrical design, flame/burner controls, control and power panel layout and design, motor drives (Frequency and VFD’s), creation of new technology for agriculture, auto/tractor, or other similar manufacturing product areas. The ability to use 3-D/CAD drawing experience is also needed.
  • ✓Certification(s): N/A

Functional Skills: Knowledge of electrical and mechanical controls, sensors, electric and control circuit design, electrical component selection, logic control sequences within control programming is required. Prior experience in designing and developing electrical and control systems is preferred. Experience National Electrical Code and electrical control systems design along with component selection is desired.

  • ✓Understanding the sequence to operate grain conditioning, handling, and storage systems is preferred. Strong ability to listen and communicate with customers to understand needs and create solutions that will meet customer’s expectations on value and price, while maximizing profit is critical.
  • ✓Technology Aptitude/Skills: Knowledge and understanding of Smart systems, sensor technology, and Smart controls, is also preferred. Intermediate use of Microsoft programs (such as Word, Excel and Powerpoint) and ERP systems is also required.
  • ✓Language Skills: Able to read/write/speak English fluently.
  • ✓Leadership/Behaviors: Ability to engage with new technology, collaborate with team members, to ensure project plan timelines, guideposts, and due dates are achieved is also important. Leadership skills with an ability to lead and influence cross functional teams through product design gates is key. Must be innovative and possess diplomacy with a desire to develop management skills. Passionate about making a difference.
  • ✓Culture Match Behaviors: Open communication, can initiate dialog to help find solutions, team player, can respectfully share information to help develop and adhere to best practices.

to Perform Essential Functions

  • ◆Ability to sit at desk for 5+ hours per day
  • ◆Ability to operate keyboard and view computer screen for majority of day 6-7 hours
  • ◆Ability to write ideas/information in a logical flow for 5+ hours per day
  • ◆Ability to read and respond on an on-going basis daily due to nature of the work, throughout the day
  • ◆Ability to communicate with others via phone, in-person, and computer on-going
  • ◆Ability to listen to customers, problem-solve, and respond accordingly
  • ◆Ability to instruct and/or operate basic hand or power tools
  • ◆Ability to stand, walk, bend, reach, kneel, squat, twist, climb, and carry and lift to 75 lbs.

Ability to climb Grain Bins, Dryers & Catwalks with heights of up to 150 ft (with safety gear) may also be required on occasion for troubleshooting and problem solving while on-site

Show full description ↓
  • •Product Research, Development & Design: Approx. 40 % of the Job
  • •Provide dryer system design and configuration including the selection of power and control components for the dryer/conditioning product lines. (Dryers, Heaters, Fans, Air-Systems)
  • •Collaborate and communicate with the plant manager and electrical department to support the product of the dryer control and power panels.
  • •Collaborates and communicates with customers and others to understand how to enhance customer experience, while attaining performance criteria (cost, reliability, productivity) for new and enhanced control features.
  • •Research new opportunities, develop and design (or assist in the design) of embedded controls to enhance the products and provide leading edge technology to customers.
  • •Develops project plans to identify timing, resources, and costs to achieve results with each new project.
  • •Collaborates and communicates with third party suppliers to direct the design of logic board layouts and provides validation of the new features (sequences, gateway guideposts, human/machine interface and mechanical validation) from concept through production release.
  • •Performs systems testing and verification via onsite or in the field, to ensure compatibility, quality and performance standards of new or enhanced control features are achieved.
  • •Product Support: Approx. 40% of the job
  • •Trouble shooting and problem resolution mainly
  • •Concentrated product support time during grain harvest season (Typically Labor Day to Thanksgiving)
  • •After Hours phone support (Evenings and Weekend rotation)
  • •Average 10 Hours per week during this period
  • •Onsite - Dealer phone support handling technical issues
  • •Remote - Field support as needed if the issue cannot be resolved from remote location
  • •Diagnostics and product support material
  • •Development of product support documents for dealers
  • •Product technical training typically off site (3-4 Weeks per year) Approx. 15% of the job
  • •2-Day training sessions
  • •3-4 Locations for travel in Midwest area

Core Values that Apply to All Positions

  • •Integrity in all things
  • •Customers are why we exist
  • •Profitability is a must
  • •Excellence in all we do
  • •People make the difference

Equipment Used

  • •This role routinely uses standard office equipment such as computers, wifi, phones, printers/copiers/scanners and filling systems.

Physical

Environmental Conditions & Travel

  • •The employee is primarily exposed to a normal office environment with moderate noise. The employee is occasionally required to wear suitable Personal Protective Equipment while visiting manufacturing departments or client locations.
  • •This position may face inclement weather conditions when traveling.
  • •Up to 15% travel based on expected visits to prototype new designs in field, dealer training, customer site support or visit key suppliers of pr

More Manufacturing roles in Indiana