ShopFloorJobs
CM

Quality Engineering Manager

Cretex Medical · Brooklyn Park, MN

Level
Level: Manager
Team
Team: Quality
Degree
Degree: Required
Experience asked
Experience asked: 5+ years
Industry
Industry: Medical devices
Posted
Posted: 30+ days ago

The role in 30 seconds

A management quality role at Cretex Medical (medical devices) in Brooklyn Park, MN. Lead, coach and develop teams responsible for new product introduction, Incoming, In-Process and Final Inspection and Quality Laboratory operations.

They ask for
5+ years · degree required
Tools it names
Root cause, SPC, FMEA, Control plans, MSA / Gage R&R, GD&T

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Quality Engineer roles in Minnesota: typical posted base $88k–$128k.

Median of the low and high ends of 54 live postings that list pay, out of 100 quality engineer openings in Minnesota, read from manufacturers' own careers sites.

Minnesota plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 99 other live quality postings in Minnesota.

Base pay
Not listed in this posting

Typical $85k–$121k, from 50 postings that list pay.

Experience asked
Typical (5+ years)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ Root cause 57%
  • Six Sigma 42%
  • ✓ Supplier quality 42%
  • ✓ Validation (IQ/OQ/PQ) 37%
  • Lean 36%
  • ✓ Control plans 33%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for Stamping, which few similar roles mention. If you have it, lead with it.

It asks for 5+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Quality team at Cretex Medical

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Which standards drive the work here: ISO 13485, IATF 16949, AS9100?
    • How much of the job is customer complaints versus prevention?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: Cretex Medical in Brooklyn Park

15 other open roles at this site.

All 16 roles at Cretex Medical →
Full description from Cretex MedicalAs posted on their careers site.Show

Position Summary

Cretex Medical is seeking a hands-on, results-oriented Quality Engineering Manager to lead inspection operations, measurement systems and quality laboratory functions while advancing engineering-driven quality improvements across new product introduction and manufacturing operations.

This leader will be responsible for developing and implementing robust, risk-based inspection and measurement strategies, improving operational efficiency, preventing defects, and ensuring products consistently meet customer and regulatory requirements.

The successful candidate will combine strong technical expertise with practical manufacturing knowledge, effective people's leadership, and a continuous improvement mindset. The role requires close collaboration with Manufacturing, Engineering, New Product Introduction (NPI), and Quality teams to strengthen process capability, improve first-time-right performance, and drive sustainable quality improvements.

Qualifications

  • ✓Bachelor's degree in engineering or related technical discipline.
  • ✓5+ years of experience in Quality Engineering, Manufacturing Quality, Inspection Engineering or Metrology within a regulated or precision manufacturing environment.
  • ✓Demonstrated experience leading, coaching and developing technical or operational teams.
  • ✓Strong understanding of inspection methods, measurement systems, GD&T, quality engineering principles and structured problem-solving.
  • ✓Working knowledge of ISO 13485 and applicable FDA Quality Management System Regulation (21 CFR Part 820) requirements.
  • ✓Ability to apply data-driven approaches to quality improvement, problem-solving and operational decision-making.
  • ✓Strong cross-functional communication, prioritization and execution skills.

Preferred Qualifications

  • ✓Medical device manufacturing
Show full description ↓

Overview

About Cretex Medical

Cretex Medical is a leading contract manufacturer of precision components and assemblies for the medical device industry. Our capabilities include injection molding, laser processing, metal stamping, and device assembly. We partner with leading medical device manufacturers to deliver innovative, high-quality products that improve patients’ lives.

Quality Leadership & Team Development

  • •Lead, coach and develop teams responsible for new product introduction, Incoming, In-Process and Final Inspection and Quality Laboratory operations.
  • •Build technical capabilities in quality engineering principles, measurement science, problem-solving and continuous improvement.
  • •Establish clear performance expectations, priorities and accountability through measurable quality, delivery and operational KPIs.
  • •Optimize resource planning, workload management and team capabilities to support manufacturing and NPI demands.
  • •Foster a culture of collaboration, technical excellence, proactive problem-solving and defect prevention.

Quality Engineering & Measurement Systems

  • •Develop and implement robust, risk-based inspection and measurement strategies aligned with product requirements, process capabilities and customer expectations.
  • •Lead improvements in inspection methods, measurement system capability, sampling strategies and inspection process validation or qualification, as applicable.
  • •Apply engineering tools including Measurement System Analysis (MSA), Gage R&R, Statistical Process Control (SPC), GD&T and statistical analysis to strengthen measurement reliability and product quality.
  • •Drive standardization and optimization of inspection methods across products, manufacturing processes and shifts.
  • •Leverage automated inspection technologies, metrology systems and digital quality data to improve accuracy, efficiency and consistency.
  • •Partner with appropriate teams to ensure measurement equipment selection, qualification, calibration and maintenance support reliable results.

Manufacturing Quality & Continuous Improvement

  • •Drive engineering-led improvements that reduce inspection cycle time, rework, defects and cost of poor quality.
  • •Partner with Manufacturing and Quality Engineering to analyze process performance, identify sources of variation and implement sustainable improvements.
  • •Support structured root-cause investigations and corrective actions related to manufacturing nonconformances, inspection failures and product quality issues.
  • •Apply risk-based approaches and data analysis to optimize inspection effectiveness while maintaining regulatory and customer requirements.
  • •Champion continuous improvement initiatives that shift quality activities from defect detection toward defect prevention.

New Product Introduction & Manufacturing Readiness

  • •Collaborate with NPI, Manufacturing Engineering and Quality Engineering to develop inspection strategies and measurement methods for new products.
  • •Support manufacturing readiness through inspection planning, measurement capability assessments and inspection method qualification.
  • •Provide technical input into PFMEA, control plans, process validations and engineering changes within the role’s area of responsibility.
  • •Ensure effective transfer of inspection methods, technical knowledge and quality controls from development into routine production.

Quality Systems, Compliance & Business Partnership

  • •Ensure inspection activities, measurement processes and associated quality records comply with applicable FDA QMSR, ISO 13485, internal quality system and customer requirements.
  • •Maintain effective controls for inspection of documentation, measurement methods, process changes and records supporting product release.
  • •Support internal, customer and regulatory audits, and address relevant findings through sustainable improvements.
  • •Partner with Quality Systems, Supplier Quality, Manufacturing and NPI teams to improve end-to-end quality performance.
  • •Communicate key quality performance trends, risks, improvement opportunities and action plans to site leadership.

More Quality roles nearby