ShopFloorJobs
C

Sustaining Manufacturing Engineer II

Cordis · Irvine, CA

Level
Level: Engineer
Team
Team: Manufacturing
Base pay
Base pay: $79k–$106k
Degree
Degree: Required (or equivalent experience)
Experience asked
Experience asked: 2+ years
Certification
Certification: Black Belt preferred
Industry
Industry: Medical devices
Posted
Posted: 13 days ago
Apply on Cordis ↗

The role in 30 seconds

An engineer-level manufacturing role at Cordis (medical devices) in Irvine, CA.

They ask for
2+ years · degree required (or equivalent experience) · Black Belt preferred
Tools it names
Lean, Six Sigma, Black Belt, Green Belt, Root cause, SPC
Base pay
$79k–$106k

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Manufacturing Engineer roles in California: typical posted base $115k–$173k. This one lists $79k–$106k.

Median of the low and high ends of 195 live postings that list pay, out of 492 manufacturing engineer openings in California, read from manufacturers' own careers sites.

California plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 491 other live manufacturing postings in California.

Base pay
About 33% below similar roles

Typical $110k–$165k, from 172 postings that list pay.

Experience asked
Less than usual (2+ vs 5+)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • Tooling 50%
  • New product launch 43%
  • ✓ Root cause 38%
  • ✓ Automation 33%
  • ✓ Lean 28%
  • ✓ Validation (IQ/OQ/PQ) 27%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for Black Belt, Green Belt, CAPA, DOE, which few similar roles mention. If you have it, lead with it.

It asks for 2+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Lifts up to 25 lbs

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Manufacturing team at Cordis

    We found 1 person at this company and state: 1 leaders. Engineers who joined in the last year or two reply the most. See them ↓

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

    Write to Richard → (free)
  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • The posting mentions a Black Belt. Does the company sponsor certification?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: Cordis in Irvine

8 other open roles at this site · 1 person we found in manufacturing roles at Cordis.

All 9 roles at Cordis →
Full description from CordisAs posted on their careers site.Show

Responsibilities

The Sustaining Manufacturing Engineer II provides technical leadership for sustaining manufacturing operations, with primary responsibility for continuous improvement, process optimization, and long-term process performance. This role aids data-driven initiatives to improve yield, reduce scrap and variation, enhance product quality, and improve manufacturing efficiency. The engineer also provides support for manufacturing nonconformance and CAPA investigations, including root cause analysis, implementation of sustainable corrective actions, and effectiveness verification. The position partners with Quality, Operations, R&D, and Supply Chain to maintain validated processes and compliance with applicable GMP and ISO 13485 requirements.

Key Responsibilities

Contribute to continuous improvement and sustaining engineering projects to improve manufacturing yield, product quality, throughput, process capability, and cost performance. Monitor manufacturing performance using process data, trends, and key metrics; identify recurring losses and prioritize measurable process improvements. Help in manufacturing process optimization activities, including structured experimentation, statistical analysis, and evaluation of process changes. Provide technical support for manufacturing-related nonconformance investigations, including product and process impact assessments, root cause analysis, and appropriate disposition support in partnership with Quality. Support CAPA investigations for manufacturing issues; develop and implement corrective and preventive actions, assess systemic risk, and verify effectiveness. Apply Lean, Six Sigma, and structured problem-solving tools to reduce waste, defects, scrap, rework, and process variation. Troubleshoot recurring equipment and process issues; implement sustainable solutions and appropriate preventive controls. Assess proposed process changes for validation, qualification, risk management, and change-control impact; support IQ/OQ/PQ or revalidation as required. Maintain and improve manufacturing procedures, work instructions, specifications, process controls, PFMEAs, and related technical documentation. Partner with Production, Quality, R&D, and Supply Chain on manufacturing improvements, audit readiness, investigation closure, and sustained process performance.

Qualifications

Bachelor’s in Mechanical, Manufacturing, Industrial, Biomedical Engineering, Chemistry or equivalent technical degree. 2+ years of manufacturing engineering experience in a regulated industry, including sustaining manufacturing or process improvement responsibilities. Working knowledge of GMP, ISO 13485, process validation, risk management, and manufacturing change control. Demonstrated experience with manufacturing nonconformance investigations and CAPA processes, including root cause analysis, corrective action implementation, and effectiveness verification. Demonstrated success using data-driven methods to improve manufacturing processes, yield, quality, or operational efficiency; strong technical writing, communication, and project management skills.

Preferred Qualifications

Experience with medical device or drug-device combination product manufacturing. Lean Six Sigma Green Belt or Black Belt certification and practical application of statistical process improvement tools. Experience with process capability analysis, DOE, SPC, and manufacturing performance metrics. Experience with automation, equipment reliability improvements, or high-volume assembly systems. Key Competencies Continuous improvement experience and results-oriented execution. Data analysis, structured root cause investigation, and evidence-based decision-making. Technical knowledge of sustaining process performance and CAPA effectiveness. Cross-functional collaboration, mentoring, and practical manufacturing problem-solving. Commitment to product quality, regulatory compliance, and operational excellence. Working Conditions Office, laboratory, and manufacturing floor environments. Regular standing or walking, occasional lifting up to 25 lbs. Must comply with GMP, ISO 13485, and all EHS requirements. Pay / Compensation The expected pre-tax pay rate for this position is $78,650 – $105,600. Actual pay may fluctuate outside of the listed range depending on skills, education, experience, job-related knowledge and location.

The Sustaining Manufacturing Engineer II provides technical leadership for sustaining manufacturing operations, with primary responsibility for continuous improvement, process optimization, and long-term process performance. This role aids data-driven initiatives to improve yield, reduce scrap and variation, enhance product quality, and improve manufacturing efficiency. The engineer also provides support for manufacturing nonconformance and CAPA investigations, including root cause analysis, implementation of sustainable corrective actions, and effectiveness verification. The position partners with Quality, Operations, R&D, and Supply Chain to maintain validated processes and compliance with applicable GMP and ISO 13485 requirements.

Key Responsibilities

Contribute to continuous improvement and sustaining engineering projects to improve manufacturing yield, product quality, throughput, process capability, and cost performance. Monitor manufacturing performance using process data, trends, and key metrics; identify recurring losses and prioritize measurable process improvements. Help in manufacturing process optimization activities, including structured experimentation, statistical analysis, and evaluation of

Show full description ↓

Overview Selution, in partnership with Cordis, specializes in the development of groundbreaking technology and commercialization of advanced drug-device combination products for the treatment of coronary and peripheral artery disease. Our mission is to revolutionize healthcare by creating next-generation solutions that address unmet and critical medical needs.

More Manufacturing roles nearby