ShopFloorJobs
CC

Manufacturing Engineer Tech | AWD Line

Club Car · Evans, GA

Apply on Club Car ↗
Level
Engineer
Team
Manufacturing
Degree
Required
Experience asked
60+ years
Industry
Automotive
Posted
11 days ago

The role in 30 seconds

An engineer-level manufacturing role at Club Car (automotive) in Evans, GA. Develop, assemble, procure or modify existing and new tooling, fixtures, and equipment to implement safety, quality and productivity projects.

They ask for
60+ years · degree required
Tools it names
Lean, Root cause, Validation (IQ/OQ/PQ), Time studies, Tooling, EHS / safety

Read from the posting. The full description is below.

From the plant jobs report · week of November 2, 2026

Manufacturing Engineer roles in Georgia: typical posted base $85k–$148k.

Median of the low and high ends of 17 live postings that list pay, out of 47 manufacturing engineer openings in Georgia, read from manufacturers' own careers sites.

Georgia plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 46 other live manufacturing postings in Georgia.

Base pay
Not listed in this posting

Typical $85k–$148k, from 17 postings that list pay.

Experience asked
More than usual (60+ vs 5+)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ Tooling 38%
  • ✓ Lean 32%
  • Automation 32%
  • ✓ Root cause 28%
  • ✓ Validation (IQ/OQ/PQ) 28%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for Time studies, which few similar roles mention. If you have it, lead with it.

It asks for 60+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Lifts up to 50 lbs

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Manufacturing team at Club Car

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: Club Car in Evans

6 other open roles at this site.

Full description from Club CarAs posted on their careers site.Show

Responsibilities

  • ◆Assist the Manufacturing Engineer(s) with developing standard work, training procedures, modules and practices that will improve safety, quality and process efficiency.
  • ◆Manages site activities to achieve SBU and Enterprise Environmental Health and Safety goals and objectives. Utilize EHS data analysis in problem solving. Assist with hands on training of manufacturing employees on new products, tooling, equipment and process revisions.
  • ◆Develop, assemble, procure or modify existing and new tooling, fixtures, and equipment to implement safety, quality and productivity projects.
  • ◆Work with site and SBU leaders to implement environmental, health and safety (EHS) programs and systems. Drive integration of EHS into daily work procedures. Identify and troubleshoot process, material, or equipment problems to minimize down time and recommend solutions to Manufacturing Engineering.
  • ◆Complete time studies to quantify and document processing times and identify areas for process improvements.
  • ◆Drive urgency of incident investigation completion by the appropriate staff for all injury, illness, near misses, property damage, and fire incidents and appropriate preventive and corrective actions taken. Provide guidance to leadership on historical and recommended corrective actions. Install and validate equipment and processes in manufacturing to improve yield and/or reduce cycle time following established validation procedures.
  • ◆Manage contractor safety program, including pre-qualification, to ensure effective safety processes are in place prior to and during work. Audit work in progress on a regular basis.
  • ◆Conduct and track EHS training to ensure compliance with regulatory policies, Enterprise and best practices. Assist in development and deployment of EHS training modules for employee and Leader development.
  • ◆Ensure facility inspections and audits are completed on a regular basis to detect existing or potential risks and hazards. Ensure the recommended corrective or preventative measures are completed in a timely manner.
  • ◆Review and provide feedback on risk assessments to control hazards and manage risk. Evaluate non-standard tasks to uncover risks and identify corrective actions.

Responsibilities

  • ◆Maintains safe and productive work environment by assuring the work area is clear of tools, brooms, debris, and other items that may present a hazard.
  • ◆Will be required to perform other duties as requested, directed, or assigned.
  • ◆Must be able to work overtime as necessary.

Education

  • ✓Associates degree in Engineering or Manufacturing Technology is required. Comparable work experience may be considered if progress toward an Associates degree is documented.
  • ✓Must complete specialized training in: First Aid/CPR/AED; RCRA / DOT for shipment/manifesting/labeling of the hazardous, regulated and special waste; HAZWOPER for spill response; Fall Protection; Arc Flash/Electrical Safety; and Lockout Tagout for Authorized Employees within the first 12 months of hire.

Experience

  • ✓Three or more years’ experience in a manufacturing environment.

Requirements

  • ✓Requires occasional lifting of objects of objects 25 to 50 pounds.
  • ✓Work requires periodic stooping/bending and frequent walking/standing.
  • ✓Work involves activities that require special safety precautions, e.g., working around moving parts, machines, or vehicles.
Show full description ↓

JOB TITLE: Manufacturing Engineer Tech

Hourly Role in Evans, GA.

Club Car boasts a 60+ year history of industry-leading innovation and design, initially focused on golf cars and then expanding to commercial utility vehicles and personal-use transportation.

General job description

The Manufacturing Engineering (ME) Technician will assist with all Engineering activities and projects at the Club Car Order Fulfillment Center (OFC). The ME Technician will work under the direction of the Manufacturing Process Engineer and will work closely with Operations, Quality, and EH&S to support and improve manufacturing operations, including standard work development and training, troubleshooting process and equipment problems, and implementing projects for safety, quality, and efficiency improvements.

Key competencies

  • •Strong capability with computer applications including email, Excel, Word, and PowerPoint preferred.
  • •Understanding of Lean principles and root cause analysis, corrective and preventative action concepts.
  • •Strong written and verbal communication skills. Able to communicate well, verbally and in writing, and have strong reading comprehension and listening skills.
  • •Strong multi-tasking, problem solving and time management skills.
  • •Follow Manufacturing Engineer(s) direction while displaying cooperative and positive behavior with co-workers.
  • •Ability to work overtime and assist in other areas as needed.

More Manufacturing roles nearby