ShopFloorJobs
Chevron logo

Process Control Engineer

Chevron · Richmond, CA

Level
Level: Engineer
Team
Team: Controls
Base pay
Base pay: $120k–$238k
Degree
Degree: Required
Experience asked
Experience asked: 7+ years
Industry
Industry: Chemicals
Posted
Posted: 5 days ago
Apply on Chevron ↗

The role in 30 seconds

An engineer-level controls role at Chevron (chemicals) in Richmond, CA. Implement, deploy, and maintain multivariable process control applications, including inferential calculations to support advanced control and optimization, that are consistent with short-term and long-term operating plans.

They ask for
7+ years · degree required
Base pay
$120k–$238k

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Controls Engineer roles in California: typical posted base $128k–$180k. This one lists $120k–$238k.

Median of the low and high ends of 65 live postings that list pay, out of 134 controls engineer openings in California, read from manufacturers' own careers sites.

California plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 133 other live controls postings in California.

Base pay
About 18% above similar roles

Typical $125k–$179k, from 61 postings that list pay.

Experience asked
More than usual (7+ vs 5+)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • Automation 69%
  • Robotics 45%
  • PLC 44%
  • Python 34%
  • Validation (IQ/OQ/PQ) 31%

✓ = this posting asks for it too. % = share of similar postings that mention it.

It asks for 7+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Controls team at Chevron

    Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: Chevron in Richmond

1 other open role at this site.

Full description from ChevronAs posted on their careers site.Show

responsibilities

include configuring and supporting process control strategies/regulatory logic, tuning of control loops, support of Honeywell TDC-3000 DCS and Honeywell Experion (C300), alarm management, and support & assistance in training console operators. Requires regular communication with many work groups including Operations, Maintenance, Technical, and Planning. Individual reports to the Process Control Team Leader within the refinery.

Required Qualifications

  • ✓Bachelor's degree in engineering.
  • ✓Minimum of 5-7 years of Mfg. process control engineering experience.
  • ✓Demonstrated familiarity with Petroleum Refining processes and/or Blending Operation.
  • ✓Demonstrated familiarity with basic & advanced/multivariable process control and DCS (Honeywell TPS and Experion (C300)).
  • ✓Effective oral & written communication skills with a wide variety of audiences and stakeholders.

Preferred Qualifications

  • ✓Bachelor Chemical Engineering degree or greater.
  • ✓10+ years in Refinery Mfg. process control engineering.
  • ✓Demonstrated familiarity with basic and advanced/multivariable process control and DCS, specifically with AspenTech DMC and/or GDOT.
  • ✓Demonstrated competency and business impact in Petroleum Refining Processes, ideally via process control contributions.
  • ✓Familiarity with analytical tools such as PI, SEEQ, Excel.
Show full description ↓

Total Number of Openings

1

Chevron is accepting online applications for the position Process Control Engineer through November 23, 2026 at 11:59 p.m. (Pacific Time).

A Process Control Engineer designs, implements, and maintains multivariable control applications (DMC3, GDOT) and supporting applications (inferred properties, etc.) to control and optimize process unit performance in a facility. Additional

for this position may include but are not limited to

  • •Implement, deploy, and maintain multivariable process control applications, including inferential calculations to support advanced control and optimization, that are consistent with short-term and long-term operating plans.
  • •Implement and maintain basic and advanced regulatory process control strategies.
  • •Provide alarm management support by monitoring alarm system performance, identifying and addressing nuisance alarms, and partnering with Operations to improve alarm effectiveness.
  • •Provide daily process control support for console operators.
  • •Collaborate with site personnel to deliver evergreen network & security compliance for basic & advanced process control applications.
  • •Identify and resolve control performance issues by coordinating with colleagues in other areas of specialization (instrumentation, analyzers, process, mechanical equipment, etc.).
  • •Identify and capture opportunities for improving the safety, reliability, profitability, and operability of the operating area through process control improvements.
  • •Train refinery personnel on the effective use of process control applications and systems.
  • •Act as a mentor/resource for refinery process and control engineers. Influence and improve work processes for a global refining technical system.
  • •Demonstrate knowledge of operating area interactions with the rest of the refinery and help troubleshoot process problems in the operating area and refinery.
  • •Maintain and grow process control skills by attending onsite and offsite training.

Relocation Options

Relocation may be considered.

International Considerations

Expatriate assignments will not be considered.

Chevron regrets that it is unable to sponsor employment Visas or consider individuals on time-limited Visa status for this position.

Regulatory Disclosure for US Positions

  • •The compensation and reference to benefits for this role is listed on this posting in compliance with applicable law. The selected candidate’s compensation will be determined based on his or her skills, experience, and qualifications. Please note that the compensation and benefits listed below are only applicable to successful candidates who are hired onto local United States payroll.
  • •The anticipated salary range for this position is $120,300 - $237,800.
  • •Chevron offers competitive compensation and benefits programs which includes, but is not limited to, variable pay, health care coverage, retirement plan, protection coverage, time off and leave programs, training and development opportunities and a range of allowances connected to specific work situations. Details are available at http://hr2.chevron.com/ .

More Controls roles nearby