Quality Manager
CECO Environmental · Denton, TX
- Level
- Level: Manager
- Team
- Team: Quality
- Travel
- Travel: 20%
- Degree
- Degree: Preferred
- Experience asked
- Experience asked: 7+ years
- Industry
- Industry: Industrial
- Posted
- Posted: Recently
The role in 30 seconds
A management quality role at CECO Environmental (industrial) in Denton, TX.
- They ask for
- 7+ years · degree preferred
- Tools it names
- Lean, Six Sigma, ISO 9001, Internal audits, Supplier quality, Welding
- Day to day
- about 20% travel
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Quality Engineer roles in Texas: typical posted base $90k–$143k.
Median of the low and high ends of 55 live postings that list pay, out of 145 quality engineer openings in Texas, read from manufacturers' own careers sites.
Texas plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 144 other live quality postings in Texas.
- Base pay
- Not listed in this posting
- Experience asked
- More than usual (7+ vs 5+)
Typical $90k–$143k, from 54 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- Root cause 66%
- ✓ Lean 37%
- ✓ Six Sigma 35%
- FMEA 32%
- ✓ Supplier quality 30%
- SPC 28%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for Welding, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Quality team at CECO Environmental
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Which standards drive the work here: ISO 13485, IATF 16949, AS9100?
- How much of the job is customer complaints versus prevention?
- The posting says about 20% travel. Between which sites?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
Full description from CECO EnvironmentalAs posted on their careers site.ShowHide
Job Summary
CECO Environmental is a global leader in providing sustainable solutions for industrial air, water, and energy transition. Since 1966, we’ve been addressing the world’s most pressing environmental challenges. Our mission is to protect people, the environment, and industrial equipment, making a tangible impact across industries like renewable energy, semiconductor manufacturing, power generation, and water treatment. As a purpose-driven company, we foster a culture of innovation, collaboration, and integrity, ensuring that every project we undertake creates lasting positive change. At CECO, you’ll be part of a growing, dynamic team committed to a cleaner, safer, and more sustainable future.
We are proud to share that CECO was named one of Newsweek’s America’s Greatest Companies for 2025 and that Forbes recognized CECO as one of America’s Most Successful Small‑Cap Companies for 2026, marking our third consecutive year on the Forbes list. CECO Environmental is a publicly traded company on the Texas Stock Exchange under the ticker CECO, reflecting our strong growth, financial performance, and commitment to delivering value to shareholders.
The Quality Manager is responsible for the leadership, administration, compliance, and continuous improvement of the Company's Quality Management System (QMS), including ASME "U" and "R" Stamp programs, ISO 9001 certification, 10 CFR 50 Appendix B requirements, U.S. Navy programs, and customer-specific quality requirements.
This position serves as the designated quality authority for the Denton, TX facility and has ownership of quality systems, certifications, audit programs, supplier quality processes, nonconformance management, product quality performance, and regulatory compliance. The Quality Manager is responsible for maintaining the integrity and effectiveness of all quality programs while ensuring products and processes meet customer, regulatory, industry, and company requirements.
The Quality Manager independently exercises quality authority to identify nonconforming conditions, reject nonconforming materials or products, stop work when necessary to ensure compliance, and enforce quality standards required to maintain certifications and regulatory approvals. The role provides leadership and direction to quality personnel, serves as the primary interface with customers, auditors, inspectors, and certification bodies, and collaborates closely with Manufacturing, Engineering, Purchasing, Sales, Customer Service, and Project Management to achieve operational excellence and customer satisfaction.
This position supports U.S. Navy programs that require U.S. citizenship. This role will be 100% onsite in Denton, Texas and have 3 direct reports. We are open to QC Supervisors, Quality Engineers, Supply Chain Quality Engineers, or Quality Coordinators who are ready to move into a Quality Manager role.
Your
qualifications
to assure welders maintain
requirements
according to ASME processes. Support the development of new processes and qualifications, as needed.
- ✓Manage our Non-Conformance Reporting (NCR) program and maintain visibility to the cost of quality.
- ✓Assesses the product specifications of the company and its suppliers and compares with customer requirements.
- ✓Writes quality procedures and provides training to the organization on the use of the quality procedures.
- ✓Liaises with our customers’ quality team and internal and external auditors, representing our Company.
- ✓Works with Purchasing and the supply chain to establish, implement and audit quality
requirements
for external suppliers.
- ✓Experience with the setup and management of formal quality documentation according to all relevant quality programs. Ability to develop, maintain and revise quality manuals and procedures.
- ✓Manage supplier qualification, maintenance, and audits.
- ✓Manage workflow related to 3rd party inspectors that visit the Denton plant on behalf of our customers.
- ✓Works directly with Operations, Engineering, Customer Service, Purchasing and Sales team to develop and validate processes designed to exceed customer
requirements
and on time delivery.
- ✓Leads continual improvement projects to achieve quality objectives and metrics targets using LEAN principles.
- ✓Ensures the execution of corrective action and compliance with customers’ specifications.
- ✓Able to maintain digital information in an organized manner on a shared network with visibility to revision controls.
- ✓Prepares monthly Quality reports: issues, metrics, and improvements.
- ✓Assesses the impact of regulatory changes that affect operations, raises awareness, and ensures compliance.
Required Qualifications
- ✓Bachelor’s degree; preferred.
- ✓7+ years of experience in Quality for industrial equipment manufacturer
- ✓Experience with ISO 9001 required.
- ✓Experience with ASME codes for fabrication; required.
- ✓Six Sigma and/or Lean Manufacturing experience; preferred.
- ✓MS Office Suite; required.
- ✓Experience with 8Ds, corrective action, and preventive action programs; preferred.
- ✓CWI or ASQ Certification (Quality Auditor, Quality Engineer, Quality Improvement Associate); preferred
- ✓Oil & Gas, Energy equipment industry-specific experience; preferred.
- ✓Structural Steel and Piping equipment industry specific experience; preferred.
Travel
Requirements
up to 20%
ADA
Requirements
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to ena
Show full description ↓Show less ↑
Will Be
- •Maintain and manage the Peerless quality programs, including activities, procedures & work instructions, for the company’s ASME “U”; ASME “R”; ISO-9001; 10CFR50, Appendix B; and US Navy programs.
- •Perform internal audits to support all quality programs.
- •Serve as the Company’s primary interface with outside agencies for quality program audits and re-qualifications.
- •Manage documentation and processes related to welder
