Maintenance Technician-Tooele ISO-CCM
Carlisle Companies · Tooele, UT
- Level
- Technician
- Team
- Reliability
- Travel
- 10%
- Industry
- Industrial
- Posted
- Yesterday
The role in 30 seconds
A technician-level reliability role at Carlisle Companies (industrial) in Tooele, UT. 51 OR MORE LBS —Occasionally.
- Tools it names
- PLC, Welding
- Day to day
- some off-shift / weekend coverage · about 10% travel
Read from the posting. The full description is below.
From the plant jobs report · week of November 2, 2026
Maintenance Technician roles in the US: typical posted base $62k–$88k.
Median of the low and high ends of 74 live postings that list pay, out of 2669 maintenance technician openings in the US, read from manufacturers' own careers sites.
Utah plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 27 other live reliability postings in Utah.
- Experience asked
- Not stated
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ PLC 46%
- ✓ Welding 32%
- Automation 32%
- Team leadership 25%
- Root cause 25%
✓ = this posting asks for it too. % = share of similar postings that mention it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Reliability team at Carlisle Companies
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- How does off-shift and weekend coverage work?
- The posting says about 10% travel. Between which sites?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: Carlisle Companies in Tooele
2 other open roles at this site.
- Maintenance Technician - ISO - Graveyard Shift · Reliability · Technician
- Process Engineer - ISO - CCM · Process
Full description from Carlisle CompaniesAs posted on their careers site.ShowHide
Job Summary
The Maintenance Technician works independently and with other plant personnel to perform preventive, predictive and routine maintenance tasks to ensure equipment and building fully operational.
Responsibilities
- ◆Perform needed maintenance on equipment and direct support of production operating needs.
- ◆Evaluate equipment operation and suggest necessary action when malfunctions occur, or improvements are needed
- ◆Participate in planning activities and manage various plant utilities that can include chiller, air compressor, security system & fire protection system.
- ◆Complete process and preventive maintenance work orders. Capture and communicate associated data.
- ◆Maintain plant machinery and equipment such as mixers, conveyors, compressors, hydraulics, motors, pneumatics, automated controls, and pumps.
- ◆Troubleshoot issues, repair failures of production and facilities equipment.
- ◆Develop knowledge of electrical and PLC troubleshooting.
- ◆Repair or replace control devices such as switches, photo eyes, proximity sensors, pushbuttons, contactors, motor starters, etc. as needed.
- ◆Set up and operate power tools, drill motor, circular saw, welders, drill press, bench grinder, band saw, hand tools and other metal working equipment
- ◆Assist with fabrication and modification of new and existing equipment.
- ◆Comply and participate regulatory, Carlisle, & departmental policies, procedures, & standards (PSM, safety protocols, COS).
- ◆As directed execute projects on an as needed basis.
- ◆Applies continuous improvement tools and processes to every aspect of the role.
- ◆Other duties as assigned.
Requirements
Frequency scale: Occasionally (0–30%) | Frequently (31–60%) | Continuously (61–100%)
Required Skills/Abilities/Knowledge
- ✓Perform needed maintenance on equipment and direct support of production operating needs.
- ✓Evaluate equipment operation and suggest necessary action when malfunctions occur, or improvements are needed
- ✓Participate in planning activities and manage various plant utilities that can include chiller, air compressor, security system & fire protection system.
- ✓Complete process and preventive maintenance work orders. Capture and communicate associated data.
- ✓Maintain plant machinery and equipment such as mixers, conveyors, compressors, hydraulics, motors, pneumatics, automated controls, and pumps.
- ✓Troubleshoot issues, repair failures of production and facilities equipment.
- ✓Develop knowledge of electrical and PLC troubleshooting.
- ✓Repair or replace control devices such as switches, photo eyes, proximity sensors, pushbuttons, contactors, motor starters, etc. as needed.
- ✓Set up and operate power tools, drill motor, circular saw, welders, drill press, bench grinder, band saw, hand tools and other metal working equipment
- ✓Assist with fabrication and modification of new and existing equipment.
- ✓Comply and participate regulatory, Carlisle, & departmental policies, procedures, & standards (PSM, safety protocols, COS).
- ✓As directed execute projects on an as needed basis.
- ✓Other duties as assigned.
- ✓Comply and participate regulatory, Carlisle, & departmental policies, procedures, & standards (PSM, safety protocols, COS).
Show full description ↓Show less ↑
Location: Tooele, UT
Shift: Sunday-Thursday, 10 PM-6:30 AM, subject to change based on needs of the business
Equipment Used
- •Forklift
- •CB radio
- •Office equipment (computer, phone, kiosk)
- •Computer systems (RFGen)
Working Conditions
- •Activities occur inside an insulation manufacturing Job includes but are not limited to exposure to the following.
- •Temperatures exposed to both Ambient/outside
- •Nuisance dust, use of chemicals, working with mechanical parts, pinch points
- •Noise of industrial machinery
- •Fumes from solvent, forklift exhaust and tractor-trailers
- •Pinch point on moving mechanical parts
- •Heavy equipment operation including forklift and yard tractor
- •Typically, 40 hour per week with overtime as required. 2nd shift
- •Fast paced 24/7 operation
Travel Requirement
- •Overnight travel up to 10%, this will include travel to other facilities and to trainings
Physical
Lifting or carrying
- •1–10 LBS — Frequently
- •11–20 LBS — Frequently
- •21–40 LBS — Frequently
- •41–50 LBS —Occasionally
- •51 OR MORE LBS —Occasionally
Pushing or pulling
- •1–40 LBS — Frequently
- •41–50 LBS — Occasionally
- •51 OR MORE LBS — Occasionally
Other physical demands
- •BENDING OR STOOPING — Frequently
- •REACHING ABOVE SHOULDER LEVEL — Frequently
- •DRIVING AUTOMATIC EQUIP. VEHICLES — Continuously
- •OPERATE MACHINERY OR POWER TOOLS — Continuously
- •CLIMBING (LADDERS, STAIRS, ETC.) — Frequently
- •WALKING — Frequently
- •STANDING — Frequently
- •SITTING — Frequently
- •WORKING IN EXTREME TEMPERATURES — Frequently
- •REPETTIVE MOTION INCLUDING BUT NOT LIMITED TO: WRISTS, HANDS AND/OR FINGERS) — Frequently
- •VISION — Continuously
- •HEARING — Continuously
- •DEXTERITY — Continuously
- •HAND EYE COORDINATION — Continuously
Personal Protective Equipment (PPE) Used
- •Safety glasses, composite toe shoes, hard hat occasionally, dust mask occasionally, safety gloves
Competencies
- •Teamwork
- •Builds trust with others by encouraging open dialogue and seeks diverse perspectives to create stronger solutions.
- •Managing Change
- •Able to keep on track despite difficulties or barriers that may be Addresses conflict to find common ground solutions. Apply COS techniques to facilitate, document, and manage changes in work cells, procedures, and processes.
- •Continuous Improvement
- •Retains a mindset of always striving to make things Applies continuous improvement tools and processes to every aspect of the role. Participates and supports in continuous improvement activities. High desire to positive change in processes by applying Lea