
Manufacturing Engineer III – 2nd Shift - New Glenn
Blue Origin · Space Coast, FL
- Level
- Level: Senior
- Team
- Team: Manufacturing
- Base pay
- Base pay: $126k–$177k
- Industry
- Industry: Aerospace & defense
- Posted
- Posted: 3 days ago
The role in 30 seconds
A senior manufacturing role at Blue Origin (aerospace & defense) in Space Coast, FL. In this role you will be responsible for providing manufacturing definition in support of Blue Origin’s New Glenn Stage Development.
- Tools it names
- Lean, Six Sigma, Root cause, FMEA, GD&T, Validation (IQ/OQ/PQ)
- Base pay
- $126k–$177k
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Manufacturing Engineer roles in Florida: typical posted base $85k–$131k. This one lists $126k–$177k.
Median of the low and high ends of 38 live postings that list pay, out of 95 manufacturing engineer openings in Florida, read from manufacturers' own careers sites.
Florida plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 94 other live manufacturing postings in Florida.
- Base pay
- About 40% above similar roles
- Experience asked
- Not stated
Typical $85k–$131k, from 36 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Lean 47%
- ✓ Tooling 43%
- Automation 34%
- ✓ Root cause 34%
- ✓ Six Sigma 31%
- ✓ Machining 31%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for MES, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Manufacturing team at Blue Origin
We found 3 people at this company and state: 2 in this kind of role, 1 leaders. Engineers who joined in the last year or two reply the most. See them ↓
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
Write to Jeremy → (free) - 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: Blue Origin in Space Coast
31 other open roles at this site · 3 people we found in manufacturing roles at Blue Origin.
- Facilities Industrial Engineer Sr. - Florida Expansion Planning · Reliability · Senior
- Automation Controls Engineer III - Factory Automation · Controls · Senior
- Sr. Industrial Engineer · Industrial · Senior
- Manufacturing Engineer II/III (Multiple Shifts) - Operations · Production · Senior
- Manufacturing Engineer III · Manufacturing · Senior
- Materials and Process Engineer II – Friction Stir Welding · Process
Full description from Blue OriginAs posted on their careers site.ShowHide
requirements
for space or utilities, and organizing the overall work area
- ✓Providing real-time floor support: dispositioning nonconformances (NCs), redlining and revising work instructions, and authoring tooling work orders
- ✓Leading root cause analysis and corrective action for production nonconformances and tooling/equipment validation issues
- ✓Writing clear shift handoffs and coordinating with day shift engineering, quality, and production operations
- ✓Supporting safety reviews and job hazard analyses (JHAs) for new and changed operations
- ✓Mentoring junior engineers working on 2nd shift
Qualifications
- ✓Prior experience working on aircraft or spacecraft structural assembly, fluids integration, avionics integration, or similar experience; total of five years of working experience
- ✓Experience driving a product from concept development into production
- ✓Experience with a variety of hardware manufacturing practices including drilling, shimming, fastening, fluids integration, avionics integration, instrumentation, precision cleaning, non-destructive testing, leak testing, orbital tube welding, and machining
- ✓Proven ability building trusting and effective working relationships that improve team performance and deliver results
- ✓Experience dispositioning nonconformances and performing root cause analysis and corrective action in a production environment
- ✓Ability to interpret engineering drawings and 3D models, including GD&T, and apply their specific intent
- ✓Experience authoring work instructions, build plans, or work orders for production hardware
- ✓Ability to work independently with minimal oversight on 2nd shift, with flexibility for overtime, weekends, and shift changes based on program needs
- ✓Strong written and verbal communication skills
- ✓Strong organizational and analytical skills
- ✓Strong digital literacy (MS Office, MS Project, MS Visio, Windchill/PLM, and Agile Management tools such as Jira, Confluence or AirTable)
- ✓Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
- ✓BS of Engineering from an accredited college or university. ABET is preferred and others will be considered
Preferred Qualifications
- ✓Hands on experience with building flight hardware
- ✓Experience with launch vehicle, spacecraft, or satellite development, production, or operations
- ✓Experience in prioritizing hardware procurement and fabrication and communicating these priorities to the team
- ✓Experience with composite manufacturing processes such as automated fiber placement (AFP), cure, and bonding
- ✓Experience with cryogenic propellant tanks or large pressure vessels
- ✓Experience with tooling design or tooling stress review
- ✓Experience providing off-shift production support
- ✓Experience with PFMEA, Lean, or Six Sigma methods
- ✓Experience with MES or electronic work instruction systems
Culture Statement
Don’t meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you’re excited about this role but your past experience doesn’t align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles.
Export Control Regulations
Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Show full description ↓Show less ↑
Application close date
Applications will be accepted on an ongoing basis until the requisition is closed.
At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We’re working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight!
This role is part of Blue Origin Operations, which is comprised of Integrated Supply Chain, Test Operations, Safety, Quality, and Mission Assurance. This includes Manufacturing and Supply Chain support across all Blue Origin facilities.
We are looking for Manufacturing Engineers to join us on building the road to space.
In this role you will be responsible for providing manufacturing definition in support of Blue Origin’s New Glenn Stage Development. This role will follow the product from early concept development, through design reviews, and into production.
Tasks will include creating build & flow documents, identifying required production tools, creating manufacturing BOMs, authoring work instructions, determining build schedules, and executing build of flight hardware on the production flow. You will work in a cross functional team role with tooling engineering, facilities engineering, and project management functions.
include but are not limited to
- •Creating build & flow artifacts including items like build plan, duration estimates, index plan, condition of assembly, and PFMEAs
- •Performing trades with vehicle level and subsystem design teams to better enable fabrication and integration of parts
- •Lead development efforts to optimize the current build plan to reduce critical path durations
- •Follow the build onto the floor and be the technical point of contact during build execution
- •Standing up the work center that the vehicle will be produced in by identifying and procuring required tools, providing facility
Background Check
- •Required for all positions: Blue’s Standard Background Check
- •Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military ins
