
Maintenance Technician - Rancho Bernardo
BAE Systems · San Diego, CA
- Level
- Level: Technician
- Team
- Team: Reliability
- Industry
- Industry: Aerospace & defense
- Posted
- Posted: 4 days ago
The role in 30 seconds
A technician-level reliability role at BAE Systems (aerospace & defense) in San Diego, CA.
- Tools it names
- Welding
- Openings
- 2 with this title at this site
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Maintenance Technician roles in California: typical posted base $72k–$118k.
Median of the low and high ends of 8 live postings that list pay, out of 179 maintenance technician openings in California, read from manufacturers' own careers sites.
California plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 188 other live reliability postings in California.
- Base pay
- Not listed in this posting
- Experience asked
- Not stated
Typical $90k–$120k, from 16 postings that list pay.
Similar roles usually ask 5+ years.
Skills these teams ask for most
- ✓ Team leadership 46%
- ✓ Welding 34%
- PLC 34%
- Tooling 22%
- Root cause 21%
- EHS / safety 20%
✓ = this posting asks for it too. % = share of similar postings that mention it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Reliability team at BAE Systems
We found 10 people at this company and state: 9 in this kind of role, 1 leaders. Engineers who joined in the last year or two reply the most. See them ↓
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
Write to Jason → (free) - 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: BAE Systems in San Diego
1 other open role at this site · 10 people we found in reliability roles at BAE Systems.
- Manufacturing Engineer · Manufacturing
Full description from BAE SystemsAs posted on their careers site.ShowHide
Qualifications
Communicate effectively both orally and in writing. Exhibit sound interpersonal skills involving interfacing and coordinating with company personnel, customers, and suppliers. Make decisions using sound judgment while complying with policies and procedures.
About BAE Systems, Inc. BAE Systems, Inc. is a defense, aerospace, and security company headquartered in Falls Church, Virginia, with more than 40,000 employees worldwide. We serve, supply, and protect those who protect us. As one of the most geographically diverse international defense companies, we deliver a full range of products and services spanning air, land, maritime, space, and cyber, including advanced electronics, intelligence solutions, and dedicated customer support.
Our culture is performance-driven and values-led, built on curiosity, creativity, and collaboration. Purpose isn't a tagline here. It's what drives us. We're developing breakthrough technologies that defend national security and make a lasting impact on our communities and our planet. When you join BAE Systems, you're not just building a career. You're contributing to a mission that truly matters.
Show full description ↓Show less ↑
Job Description Basic Functions of the Job/Occupational Summary: This occupation requires the maintenance, repair, disassembly, installation and dismantling of various machines and equipment such as, fabricating machines, welding and processing equipment and material handling equipment, minor plumbing repairs. Repair and rebuild perishable tools such as drill motors, soldering irons and guns, sanders, air motors and heat sealers. Perform routine maintenance assignments involving painting, carpentry, minor machine repair, welding, equipment servicing, etc., either assisting a higher classified employee or performing work independently where his/her skills permits.
Primary Duties and Responsibilities/Typical Work Performed: Set, adjust and seal weighing machines, tensiometers, engineering levels and small tools. Determine operations sequences and methods to use when repairing, assembling, installing and check-testing these machines and equipment, including parts to be remachined, repaired or replaced, following and being guided by trade practice, manufacturers’ drawings and specifications, installation layouts and sketches and verbal and written instructions.
Perform such typical maintenance mechanic work operations as repairing, overhauling, mechanical servicing, disassembly and assembly, dismantling and installing machines and equipment. Set up and operate incidental to other work described herein, such machines and tools as drill presses, power saws, pedestal grinders, and small tools.
Check proper functioning of machines worked on after repair, maintenance and installation work by setting up and operating for testing purposes. May be required to do bench work in the making of special shop equipment to be used with the above-mentioned machines.
Perform Minor repair work on clogged sewer lines and sanitary plumbing equipment such as urinals, water closets and drinking fountains.
May perform various welding operations such as arc welding, oxy-acetelene, silver brazing, TIG welding and others, as required.
Perform simple carpentry work as necessary to repair and alter buildings, partitions, cabinets, benches and other wooden items. Lay new tile floors and repair existing tile floors.
Clean- up after task/project is completed.
Plug in appliances / power strips to facilitate room set-ups.
Layout, assemble/disassemble, move and modify cubicle and modular furniture
Paint wall partitions, ceilings, machinery, furniture and minor equipment where finish is not critical and does not require trimming, blending, stripping or decorative painting.
Perform furniture service and repair. Does such typical work as movement of facilities, minor rearrangements, replacement of door hardware, installing lockbars, repair of office furniture, hanging of chalkboards, pictures, clocks, signs and maps.
Perform preventative maintenance such as oiling, adjusting and replacing belts, replacing door gaskets, cleaning condensers, changing air filters, other than electronic equipment.
Use shop hand tools, portable power tools and machines and equipment necessary to perform work.
May drive truck or power driven tractors and forklift tractors incidental in the performance of the above duties.
Required Education, Experience, & Skills Typical Related Experience: Two (2) years hands-on experience with maintenance activities outlined in job description primary duties and responsibilities. (5) years maintenance experience required. Seven (7) years maintenance experience preferred.
Preferred Education, Experience, & Skills Supervision Received: Work is performed without appreciable direction.
Working Relationships: Within Company: Primarily internal to BAE Systems. Outside of Company: Limited outside contact with suppliers.
Physical Tasks: Exerts frequent physical energy, walks considerable distances, climbs ladders, and lifts and carries heavy objects.
Working Conditions: Factory and office environment, may work extended hours or weekends, occasionally exposed to disagreeable conditions and may work with hazardous material.
More Reliability roles nearby
- Process Equipment Maintenance Specialist III · PCI Pharma Services · San Diego
- Senior Reliability Engineer · PCI Pharma Services · San Diego
- Facilities Maintenance Specialist III - 2nd Shift · PCI Pharma Services · San Diego
- Engineering Manager, Air Vehicle Mechanical Systems (R5391) · Shield AI · San Diego
