ShopFloorJobs
Anduril Industries logo

Lead Manufacturing Engineer, Turbine Engines

Anduril Industries · Santa Ana, CA

Level
Level: Manager
Team
Team: Manufacturing
Degree
Degree: Preferred
Experience asked
Experience asked: 8+ years
Industry
Industry: Aerospace & defense
Posted
Posted: 30+ days ago

The role in 30 seconds

A management manufacturing role at Anduril Industries (aerospace & defense) in Santa Ana, CA. Be a strong partner with Product Quality Engineering to drive and support RCCA burndowns that tackle key manufacturing defects and non-conformances both internally and externally to Engine Production.

They ask for
8+ years · degree preferred
Tools it names
Machining, Tooling

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Manufacturing Engineer roles in California: typical posted base $115k–$173k.

Median of the low and high ends of 195 live postings that list pay, out of 492 manufacturing engineer openings in California, read from manufacturers' own careers sites.

California plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 491 other live manufacturing postings in California.

Base pay
Not listed in this posting

Typical $110k–$165k, from 173 postings that list pay.

Experience asked
More than usual (8+ vs 5+)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • ✓ Tooling 50%
  • ✓ New product launch 43%
  • Root cause 38%
  • Automation 33%
  • Lean 28%
  • Validation (IQ/OQ/PQ) 27%

✓ = this posting asks for it too. % = share of similar postings that mention it.

It asks for 8+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Manufacturing team at Anduril Industries

    We found 2 people at this company and state: 2 in this kind of role. Engineers who joined in the last year or two reply the most. See them ↓

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

    Write to Kevin → (free)
  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • Is the work mostly new product launches or sustaining existing lines?
    • How much time do you spend on the floor versus at a desk?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: Anduril Industries in Santa Ana

35 other open roles at this site · 2 people we found in manufacturing roles at Anduril Industries.

All 36 roles at Anduril Industries →
Full description from Anduril IndustriesAs posted on their careers site.Show

Required qualifications

  • ✓Degree in a technical field preferred such as engineering, math, or a hard science.
  • ✓8+ years of experience in a relevant field, preferably manufacturing or design of avionics or electrical systems.
  • ✓Demonstrated ability to creatively deliver avionics hardware in a resource-constrained environment.
  • ✓Demonstrated in-kind or direct team leadership skills, with backing examples.
  • ✓An attitude of world-class mission assurance, quality, attention to detail, and dedication.
  • ✓A genuine interest in manufacturing and thirst for learning.
  • ✓Demonstrated ability to bring up assembly operations for electrical assemblies.
  • ✓Personal experience physically manufacturing hardware via any means (machining, fabrication, soldering, assembly, etc.) Work on personal or extracurricular projects is a plus.
  • ✓Proficient at ERP, CAD, PLM, and FRACAS software.
  • ✓Must be a U.S. Person due to required access to U.S. export controlled information or facilities.

Preferred qualifications

  • ✓Experience with Avionics or Propulsion Products that require system AI&T (assembly, integration, and test).
  • ✓Hands-on experience with software & firmware flashing or end-of-line testing & troubleshooting.
  • ✓Demonstrated success in scaling product testing and production from tens/hundreds to hundreds/thousands.
  • ✓Skills in cost analysis, cost reduction strategies, and managing production budgets.
  • ✓Software scripting experience in any language.

$147,000 — $196,000 USD

Show full description ↓

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century’s most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril’s family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.

Lead Manufacturing Engineer, Turbine Engines

Job descriptions

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century’s most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril’s family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.

Summary - about the team / job

Anduril’s Manufacturing team is seeking a Lead Manufacturing Engineer to join our team. The Propulsion Manufacturing Team is responsible for rapidly iterating and building cutting-edge defense hardware for the Core Technologies Platform. This responsibility includes everything in the manufacturing value-chain, including, but not limited to, Design for Manufacturability work, tool design & selection, process creation & optimization, vendor sourcing & interaction, quality planning, and work documentation associated with the hardware that the Manufacturing Engineer owns.

The right person for this role can demonstrate past holistic ownership on solving a technical challenge with a creative, physical, solution that they either personally manufacturing or oversaw manufacturing on, in a fast-paced, resource-limited environment. If you are someone who thrives in such an environment, then this role is for you.

What you’ll do

  • •Build, mentor, and lead a high-performing team of Manufacturing Engineers and Specialists with deep product knowledge in turbine engine assembly, precision rotating components, hot-section fabrication, propulsion testing, and system integration.
  • •Leverage expertise in New Product Introduction (NPI) to seamlessly transition turbine engines and their precision components from prototype to high-volume production, optimizing manufacturability and supply chain scalability.
  • •Be a strong partner with Product Quality Engineering to drive and support RCCA burndowns that tackle key manufacturing defects and non-conformances both internally and externally to Engine Production.
  • •Collaborate with Design Engineering teams early in the development process to feed back Design for Manufacturability on turbomachinery designs.
  • •Define workflows with cross-functional teams for effective collaboration across the engine build process.
  • •Partner with Design Engineering from early to late phases of development to provide DFx for smooth NPI transitions of turbine engine hardware.
  • •Own a portion or all of the manufacturing value chain for a given engine program or set of turbomachinery products.
  • •Develop process flows, breaking down large, complex engine assemblies into a logical part flow of subassemblies and sub-processes.
  • •Specify, design, procure, and validate tooling, fixtures, and manufacturing equipment to support production goals and process requirements.
  • •Contribute to end-customer hardware mechanical design, including rotating assemblies, precision machined components, inspection, and test.

More Manufacturing roles nearby