Staff Engineer, Facilities Engineering
Analog Devices · Massachusetts
- Level
- Senior
- Team
- Reliability
- Base pay
- $110k–$151k
- Travel
- 10%
- Degree
- Required
- Experience asked
- 10+ years
- Industry
- Industrial
- Posted
- Yesterday
The role in 30 seconds
A senior reliability role at Analog Devices (industrial) in Massachusetts.
- They ask for
- 10+ years · degree required
- Tools it names
- Root cause, PLC, Robotics, Automation, AutoCAD
- Base pay
- $110k–$151k
- Day to day
- about 10% travel
Read from the posting. The full description is below.
From the plant jobs report · week of November 2, 2026
Reliability Engineer roles in Massachusetts: typical posted base $97k–$135k. This one lists $110k–$151k.
Median of the low and high ends of 9 live postings that list pay, out of 17 reliability engineer openings in Massachusetts, read from manufacturers' own careers sites.
Massachusetts plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 16 other live reliability postings in Massachusetts.
- Base pay
- About 12% above similar roles
- Experience asked
- More than usual (10+ vs 7+)
Typical $97k–$135k, from 8 postings that list pay.
Similar roles usually ask 7+ years.
Skills these teams ask for most
- ✓ Root cause 65%
- ✓ Automation 47%
- Tooling 47%
- ✓ Robotics 41%
- Validation (IQ/OQ/PQ) 35%
- New product launch 35%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for PLC, AutoCAD, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Reliability team at Analog Devices
We found 5 people at this company and state: 5 in this kind of role. Engineers who joined in the last year or two reply the most. See them ↓
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
Write to Timothy → (free) - 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- The posting says about 10% travel. Between which sites?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
Full description from Analog DevicesAs posted on their careers site.ShowHide
Responsibilities
- ◆Design and Development
- ◆Lead the design and development of mechanical and/or electrical systems and components for various facilities-related projects.
- ◆Project Management
- ◆Oversee project planning, scheduling, and resource allocation to ensure project completed within specifications, on-time, and within budget.
- ◆Team Leadership
- ◆Mentor junior engineers and maintenance technicians by providing technical guidance and support.
- ◆Technical Documentation
- ◆Prepare and review technical documentation, specifications, reports, and design schematics.
- ◆Compliance and Standards
- ◆Ensure all projects comply with relevant safety, regulatory, and ADI Global Engineering standards. Conduct feasibility studies, root cause analysis, and technical assessments.
- ◆Collaboration
- ◆Work closely with multidisciplinary engineers and teams to integrate mechanical and/or electrical systems into larger projects.
- ◆Troubleshooting
- ◆Identify and resolve complex technical issues, conducting diagnostics and performance evaluations of mechanical systems. Subject matter expert during root cause analysis activities when discussing mechanical and/or electrical systems and delivery.
- ◆Interact with manufacturing engineers and leaders supporting factory growth and optimization.
- ◆Ensure safe practices are leveraged by contractors and technicians when performing maintenance and repairs.
- ◆Driving sustainable methods for operation to conserve utility resources aligning to ADI’s Global Engineering initiatives.
Qualifications
- ✓BS or MS degree in Mechanical or Electrical Engineering.
- ✓Five (5) years or more experience in a facilities or construction mechanical or electrical engineering role.
- ✓Mechanical Systems:
- ✓HVAC Systems: Chillers/Towers > 900-ton, steam boilers, process cooling, process vacuum, make-up air systems > 50k CFM, return air systems/filtration, humidification systems.
- ✓Motor and pump service, alignment, lubrication, bearing & seal replacements.
- ✓Electrical systems:
- ✓Voltages from control to 480 VAC, Lighting, Variable Frequency Drives, IR scanning and power quality analyzing.
- ✓Proficiency using volt-ohm, amperage, loop & process calibrators and source output meters.
- ✓Control Systems: Building Management Systems, installations, programming, troubleshooting, repair/service including PLC programming, service and troubleshooting.
- ✓Life-safety fire alarm systems: Wet and dry, NFPA inspections / requirements.
- ✓Perform MEP capacity and energy calculations.
- ✓Class 1 production area environment.
- ✓Demonstrated proficiency in speaking, reading, writing and understanding the English language
- ✓Must be proficient with Microsoft Excel (formulas & charts) and have good skills with MS Office products.
- ✓Must be able to read schematics (mechanical/electrical) and P&IDs.
- ✓Must be proficient with AutoCAD version MEP2023
- ✓Candidate needs to be self-motivated, safety oriented, have good people skills, be able to multi-task and enjoy working in a fast-paced / fluid environment
- ✓Candidate needs to be thorough and driven to continuously improve systems and processes.
- ✓Strong presentation and technical documentation skills
- ✓Strong organizational skills and the ability to work and lead a team to aggressive schedules.
Show full description ↓Show less ↑
About Analog Devices
Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, AI, and software technologies into solutions that combat climate change, reliably connect humans and the world, and help drive advancements in automation and robotics, mobility, healthcare, energy and data centers. With revenue of more than $11 billion in FY25, ADI ensures today's innovators stay Ahead of What's Possible. Learn more at www.analog.com and on LinkedIn and X .
The Facilities Operations team at Analog Devices is currently seeking an experienced engineer to support facilities equipment installation, troubleshooting, and project construction for site locations in Wilmington and Chelmsford, MA. This role will be based out of Wilmington, MA. The role requires a skilled engineer, capable of solving mechanical and/or electrical system capacity and resiliency. The candidate will operate as an interface between 3rd party engineers supporting larger construction projects as well as supporting day-to-day issues as they arise related to the mechanical and/or electrical infrastructure. They will play a leading role in defining process and mechanical and/or electrical system standards and requirements. The candidate will lead ADI’s environmental and sustainability goals from a facilities infrastructure perspective. This role reports to the Director of Facilities Operations.
Preferred Skills, Knowledge and Abilities
- +5-10 years or more experience with semiconductor Facilities such as:
- +Toxic Gas systems: ACM, TGM, DOD PS-7 sensors, system integrations, PLC programming and sensor semi-annual gas challenging.
- +Proficiency using volt-ohm, amperage, loop & process calibrators and source output meters.
- +Siemens “Insight/Apogee/Desigo” building operations & programming.
- +Ultra-Pure Water manufacturing: RO/DI.
- +Rockwell Automation Control Logix.
For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position – except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) – may have to go through an export licensing review process.