ShopFloorJobs
Altium Packaging logo

PLC Controls Specialist

Altium Packaging · Tracy, CA

Level
Level: Specialist
Team
Team: Controls
Experience asked
Experience asked: 2+ years
Industry
Industry: Packaging
Posted
Posted: 7 days ago

The role in 30 seconds

A specialist controls role at Altium Packaging (packaging) in Tracy, CA. High School diploma, GED, or equivalent education.

They ask for
2+ years
Tools it names
FDA / GMP, PLC, Welding, EHS / safety
Day to day
some off-shift / weekend coverage

Read from the posting. The full description is below.

From the plant jobs report · week of November 16, 2026

Controls Engineer roles in California: typical posted base $128k–$180k.

Median of the low and high ends of 65 live postings that list pay, out of 134 controls engineer openings in California, read from manufacturers' own careers sites.

California plant jobs report →Pay by team and state →What moves pay →

How this role compares

Against 133 other live controls postings in California.

Base pay
Not listed in this posting

Typical $125k–$180k, from 62 postings that list pay.

Experience asked
Less than usual (2+ vs 5+)

Similar roles usually ask 5+ years.

Skills these teams ask for most

  • Automation 69%
  • Robotics 45%
  • ✓ PLC 44%
  • Python 34%
  • Validation (IQ/OQ/PQ) 31%

✓ = this posting asks for it too. % = share of similar postings that mention it.

Stands out: this posting asks for FDA / GMP, Welding, EHS / safety, Team leadership, which few similar roles mention. If you have it, lead with it.

It asks for 2+ years. If you're close, apply anyway: requirements are a wish list. Talk to someone doing this work there first.

At a glance

Off-shift / weekend coverageLifts up to 50 lbs

Pulled from the posting text. If it's not listed here, the posting didn't say.

How to get in at this plant

Five moves over a week or two. The first one takes ten minutes.

  1. 1

    Pick 2–3 people on the Controls team at Altium Packaging

    We found 2 people at this company and state: 2 leaders. Engineers who joined in the last year or two reply the most. See them ↓

  2. 2

    Send a short, curious note

    One real question about their work. No favors yet. Each person gets a different note, written for this role.

    Write to Jose → (free)
  3. 3

    Turn a reply into a short call

    Questions worth asking about this team:

    • What does a normal week look like on your team?
    • How does off-shift and weekend coverage work?
    • How did you land the job? What stood out in your interviews?
  4. 4

    Apply with someone vouching for you

    If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.

  5. 5

    Bring proof to the interview

    One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.

This plant: Altium Packaging in Tracy

4 other open roles at this site · 2 people we found in controls roles at Altium Packaging.

Full description from Altium PackagingAs posted on their careers site.Show

responsibilities

require continuous work near heat, noise, hydraulic, gas, and melted plastic.

  • ◆Designing, programming, repairing and troubleshooting control systems, often working with PLC's and HMI systems.
  • ◆Perform preventative maintenance on PLC systems.
  • ◆Download & save programs for all PLC systems on every line to back them up.
  • ◆Upgrade production lines with new equipment and technology.
  • ◆Install and test new manufacturing, packaging and processing equipment. Interface with machine tools and special equipment or test modules, troubleshoot existing equipment for electrical or electronics failures and change or modify machines to improve or update them.
  • ◆Work with IT and equipment manufacturers to troubleshoot and repair control systems.
  • ◆Inspect, repair, install, modify, and maintain electrical/electronic systems, control circuits and other production equipment.
  • ◆Responsible for developing user interfaces and ensuring systems meet safety and efficiency standards.
  • ◆Troubleshoot and repair pneumatic, hydraulic, mechanical systems, blow molders, packaging equipment, resin transferring systems and support equipment.
  • ◆Work with production to make rapid, educated decisions regarding the issue at hand.
  • ◆Ensure safety of electrical networks and cables.
  • ◆Participate and direct troubleshooting activities in the event of equipment failure including participation in failure analysis, problem solving and prevention.
  • ◆Support repairs and installations for advanced production/manufacturing equipment.
  • ◆Maintain machines in optimal processing conditions.
  • ◆Perform mold, pin and other mechanical changes.
  • ◆Execute preventative maintenance and repairs when required in addition to planned mechanical maintenance duties.
  • ◆Participate in continuous improvement culture while following safe workplace practices.
  • ◆Develop positive and respectful interactions with managers, supervisors, maintenance technicians, and machine operators.
  • ◆Perform welding and fabrication as needed.
  • ◆Perform other duties as required by supervisor/manager.
  • ◆Mentor and provide support to less experienced technicians.
  • ◆Enforce GMP, safety, & audit standards.
  • ◆Ensure compliance with corporate and plant safety standards and with applicable laws and regulations issued by regulatory agencies.
  • ◆The position may require weekend and/or holiday work based on business needs.
  • ◆Reasonable mandatory overtime may be required due to business needs.

Qualifications

The

Requirements

  • ✓Basic mathematical skills
  • ✓Basic computer skills
  • ✓Basic knowledge of pneumatics, hydraulics
  • ✓Excellent attention to detail
Show full description ↓

Location Address

75 W Valpico Road, Tracy, California 95376

Work Shift

8hr-1st Shift (United States of America)

Job Profile Summary

The PLC Controls Specialist is responsible for designing, programming, repairing, & maintaining manufacturing and packaging control systems and equipment used within Altium Packaging. This position requires strong mechanical & electrical skills in areas such as hydraulics, pneumatics, packaging equipment, material transfers, blow molders and PLC systems. The technician will inspect equipment for proper operation and perform preventative maintenance duties per manufacturer's specifications. Troubleshoot equipment malfunctions and make repairs or adjustments as needed. Most job duties and

Preferred

  • +2+ years maintenance experience, specifically in the manufacturing industry
  • +High School diploma, GED, or equivalent education
  • +OSHA Forklift certification

Physical demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities who are otherwise qualified to safely perform the essential functions of the job, unless such accommodation would impose an undue hardship on the Company. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; and reach with hands and arms. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee frequently is required to lift and/or move up to 50 pounds.

Work environment

While performing the duties of this job, the employee is regularly exposed to moving mechanical parts in a production environment. The noise level in the work environment is usually loud. Temperatures inside the plant can fluctuate between hot and cold according to seasonal changes. Personal protective equipment (PPE) is required in the production department and other designated areas.

#IND1

Targeted Pay Range

$37.60 - $55.29

Altium Packaging, Our Culture Differentiates Us!

We incorporate our Guiding Principles into all aspects and at all levels of the organization and use them as a framework for decision-making. We believe our Guiding Principles foster a culture of excellence that benefits both employees and customers.

Our Guiding Principles

  • •Act with Integrity & in Compliance
  • •Drive Value Creation
  • •Be Disciplined Entrepreneurs
  • •Focus on the Customer
  • •Act with Humility
  • •Treat others with Dignity and Respect
  • •Seeking Fulfillment in your Work

We Believe in Rewarding our Most Important Resource – Our People!

We show our commitment to Total Rewards by providing a competitive, comprehensive benefits package. In addition to medical, dental and vision plans, company holidays and vacation days, tuition reimbursement, learning and training opportunities, bonus potential, and a 401(k) plan with company contributions, Altium Packaging locations offer rewards and re

More Controls roles nearby