Process Engineering Supervisor (USAC)
AFL · Duncan, SC
- Level
- Level: Supervisor
- Team
- Team: Process
- Degree
- Degree: Required
- Certification
- Certification: Black Belt preferred
- Industry
- Industry: Industrial
- Posted
- Posted: Yesterday
The role in 30 seconds
A supervisor process role at AFL (industrial) in Duncan, SC. Author, review, and maintain clear, safe work instructions and standard operating procedures that build in hazard controls, lockout/tagout, and PPE requirements.
- They ask for
- degree required · Black Belt preferred
- Tools it names
- Lean, Six Sigma, Root cause, DMAIC, SPC, Control plans
- Openings
- 2 with this title at this site
Read from the posting. The full description is below.
From the plant jobs report · week of November 16, 2026
Production Supervisor roles in South Carolina: typical posted base $86k–$126k.
Median of the low and high ends of 10 live postings that list pay, out of 56 production supervisor openings in South Carolina, read from manufacturers' own careers sites.
South Carolina plant jobs report →Pay by team and state →What moves pay →
How this role compares
Against 209 other live process postings in the US.
- Base pay
- Not listed in this posting
- Experience asked
- Not stated
Typical $58k–$83k, from 13 postings that list pay.
Similar roles usually ask 3+ years.
Skills these teams ask for most
- ✓ Team leadership 36%
- ✓ Root cause 21%
- Injection molding 21%
✓ = this posting asks for it too. % = share of similar postings that mention it.
Stands out: this posting asks for Six Sigma, DMAIC, SPC, Control plans, which few similar roles mention. If you have it, lead with it.
At a glance
Pulled from the posting text. If it's not listed here, the posting didn't say.
How to get in at this plant
Five moves over a week or two. The first one takes ten minutes.
- 1
Pick 2–3 people on the Process team at AFL
Engineers who joined in the last year or two reply the most. Use the team search on this page to find them.
- 2
Send a short, curious note
One real question about their work. No favors yet. Each person gets a different note, written for this role.
- 3
Turn a reply into a short call
Questions worth asking about this team:
- What does a normal week look like on your team?
- Is the work mostly new product launches or sustaining existing lines?
- How much time do you spend on the floor versus at a desk?
- The posting mentions a Black Belt. Does the company sponsor certification?
- How did you land the job? What stood out in your interviews?
- 4
Apply with someone vouching for you
If the call went well, ask whether they’d pass your résumé to the hiring manager. Send your résumé link, apply that day, and let them know.
- 5
Bring proof to the interview
One page of before-and-after numbers from projects you led: scrap, OEE, cycle time, cost. Plant managers hire on results.
This plant: AFL in Duncan
15 other open roles at this site.
- Tooling Technician - ACA · Manufacturing · Technician
- CNC Technician | ACA - 2nd Shift · Manufacturing · Technician
- Swage Tooling Technician - Business Operations & Programs · Production · Technician
- Quality Engineer (ACA) · Quality
- Process Technician - USAC | Day Shift · Process · Technician
- Production Supervisor - USAC - Night Shift · Production · Supervisor
Full description from AFLAs posted on their careers site.ShowHide
General description of the role
The Process Engineering Supervisor leads the process engineering team supporting wire manufacturing at AFL's USAC facility in Duncan, SC. The role is accountable for the setup, performance, and stability of the wire drawing, aluminum cladding, and rewind processes. This includes owning machine performance metrics such as process optimization, product industrialization, safety leadership, quality and cost improvement, capital project support, managing scrap, writing safe work instructions, troubleshooting equipment, and leading structured technical problem-solving. The ideal candidate combines strong people leadership with hands-on knowledge of wire manufacturing, metal forming, and continuous improvement.
Responsibilities
- ◆Lead and develop the team. Supervise, coach, and develop Process Engineers and Process Technicians; set priorities aligned with business objectives; support recruitment, onboarding, and cross-training; and build a culture of accountability, innovation, collaboration, and continuous improvement.
- ◆Own manufacturing processes. Provide technical leadership for aluminum-clad steel and aluminum alloy wire manufacturing, including steel wire breakdown and finish drawing, aluminum cladding, and wire rewinding. Establish process standards, operating windows, and control plans.
- ◆Detail setup procedures. Define and document setup procedures, process parameter sheets, tooling and die selection, and changeover standards for each line so every shift sets up equipment consistently and runs right the first time.
- ◆Troubleshoot equipment function. Lead hands-on troubleshooting of equipment and process function on the production floor; partner with Maintenance and Operations to diagnose mechanical, electrical, and controls issues; and restore stable operation quickly.
- ◆Write safe work instructions. Author, review, and maintain clear, safe work instructions and standard operating procedures that build in hazard controls, lockout/tagout, and PPE requirements. Train operators on them and verify they are followed on the floor.
- ◆Own machine performance. Own line-level performance for each machine in the area, including Right First Time (RFT), First Pass Yield (FPY), uptime, and throughput. Set targets, track results by machine and product, and drive improvements in safety, quality, delivery, cost, process capability, and stability.
- ◆Manage scrap. Own scrap tracking and reduction for the area: quantify scrap by machine, product, and cause; lead actions that reduce scrap, rework, downtime, defects, and variability; and partner with Quality on nonconforming material disposition.
- ◆Lead technical problem-solving. Direct structured root-cause investigations, corrective and preventive actions, and resolution of chronic manufacturing issues and customer quality concerns.
- ◆Industrialize new products and processes. Lead process development, risk assessments, qualification trials, manufacturing readiness, and specifications for new wire products and equipment. Partner with Product Engineering and Operations to transfer new products and technologies into production.
- ◆Advance continuous improvement. Lead Lean, Six Sigma, and DMAIC projects; apply statistical methods and data analytics; establish KPIs; and monitor performance trends.
- ◆Support quality systems. Maintain process documentation and production records; support internal and external audits; and help maintain compliance with ISO 9001 and ISO 14001 requirements.
- ◆Execute capital projects. Support equipment specification, procurement, FAT, installation, commissioning, startup, and qualification. Lead engineering support for new lines and capacity expansions, including technical justification and ROI analysis.
- ◆Champion safety and sustainability. Promote a safety-first culture, lead hazard assessments and mitigation, ensure engineering compliance with safety and environmental requirements, and support waste-reduction initiatives.
Qualifications
- ✓Bachelor's degree in Mechanical, Metallurgical, Materials Science, Manufacturing, Industrial, or a related engineering discipline.
- ✓Seven or more years of manufacturing or process engineering experience, including three or more years leading engineers or technical personnel.
- ✓Experience in wire drawing, metal forming, aluminum extrusion or cladding, wire and cable, or a similar continuous manufacturing environment.
- ✓Demonstrated success leading process improvement initiatives and delivering measurable manufacturing results.
Show full description ↓Show less ↑
AFL manufactures industry-leading fiber optic cable, connectivity and accessories and provides engineering and installation services for some of the largest telecom customers in the world. Our company was founded in 1984 with a single fiber optic cable and today, we manufacture thousands of products, generate an excess of $4B in revenue, and employ approximately 12,000 associates worldwide. At AFL, we recognize that our employees are our greatest asset. We hire and train each individual, investing in them to ensure success in their careers. With a commitment to professional development and growth, let us connect you to your next career opportunity.
What We Offer
- •Flexible time off policy
- •401K Company match (up to 4% - dollar for dollar)
- •Professional development, training, and tuition reimbursement programs
- •Excellent medical, dental, vision, and life insurance policy options
- •Opportunities for career advancement with an industry leading company
Technical knowledge
- •Wire drawing, drawing die design and lubrication, aluminum cladding, or related technology.
- •Statistical Process Control, process capability analysis, Design of Experiments, and manufacturing data analytics.
- •Root Cause Analysis, Lean Manufacturing, Six Sigma, and structured problem-solving methods.
- •Industrial automation and controls fundamentals, and hands-on troubleshooting of mechanical, electrical, and PLC-controlled equipment.
- •Pr
